3D Printer Magnetic Build Surface 220mm for Anycubic Mega i3 Creality Ender 3 Ender 3X Anet A8 WanHao i3 Detachable Square Black (220×220) Eewolf …

3D Printer Magnetic Build Surface 220mm for Anycubic Mega i3 Creality Ender 3 Ender 3X Anet A8 WanHao i3 Detachable Square Black (220×220) Eewolf

Specification:
Backing: B with 3M backing. Make it easier to adhere the filament to the heat bed.
Size: 220mm x 220mm
Color: blue

Package:
1 x A Magnetic Hot Bed Sticker
1 x B Magnetic Hot Bed Sticker

NOTE:
1、Heating the platform not higher than 80℃ to make sure the magnetic works better.
2、Adjust the panel to find a better direction of magnetism.
3、Due to the thickness of the sticker, please adjust the height of your Z axis(High temperature of the nozzle will damage the sticker).
4、Compatible with PLA, WOOD, CARBON FIBER, TPU filament. Support Creality ender 3, ender 3 pro, ender 3X, anet a8, wanhao i3 ect.

Product Features

  • Ender 3 build surface: NOTE: When you open the package, please make sure the product has two parts. The blue part is the surface while the other part back with 3M adhesive which should stick on the hot bed. Besides, please adjust the 90 degrees direction if there is a weak magnetic.
  • BUILD SURFACE: improves the molding accuracy of the filament. Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • COMPATIBLE with filament PLA, HIPS, PETG, TPE, NYLON, PC, RETT.
  • HEAT BED: It is recommended that the temperature of the heat bed not exceed 80 ℃. Easy to use and without bumps or bubbles.
  • SUPPORT: Creality ender 3, ender 3 pro, ender 3X, anet a8, wanhao i3 ect.

Detailed Information available on our Homepage…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “3D Printer Magnetic Build Surface 220mm for Anycubic Mega i3 Creality Ender 3 Ender 3X Anet A8 WanHao i3 Detachable Square Black (220×220) Eewolf …”

  1. Works great on my MP Maker Select v2 I have this on my (heavily modified) monoprice maker select. I cut the corners off the base magnet sheet to get it around the screws, and used a hole punch to add clearances to the bed sheet. Also, in the photo I punched a hole and added some kapton tape in the home position so the initial extruder heating doesn’t dent the bed. The way I set it up, it does bow up slightly in the corners (since there’s no magnets by the screws), so there is contact between the sheet and the extruder in the home…

  2. Anycubic I3 Mega (non S) – I’ve had the printer for 2 years now and done several hundred prints and designs of my own. I’m not new to printing but even so this review shows you can still make mistakes.First let me say that a magnetic base for your printer is AMAZING and this one works quite well with some room for improvement. I’ve made several successful prints on it so for and they all pop off very easily. I use a small amount of elmers glue stick just as an extra bit of help to…

Leave a Reply

Your email address will not be published. Required fields are marked *