3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D

Color:Silk Rainbow
Diameter (Tolerance): 1.75 mm ±0.05 mm
Net Weight: 1000g
Recommended Printing Temp: 195 – 230 °C
Recommended Printing Speed: 30 – 60 mm/s
Heated Bed: Not required but can be used (up to 60 °C)
The dimensions of spool:
Spool Diameter: 20cm
Spool Width: 6.9cm
Spool Hub Hole Diameter: 5.3cm

Product Features

  • No polishing needed, printing at a high detail results in a beautiful finish.
  • Highlight silk pla filament multicolored color
  • Nice shiny Special Rainbow Multi Color Gradient
  • Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament
  • The change from one color to another is random.

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D”

  1. Worst! This has been the worst pla iv ever worked with. Not only was the spool cracked when I recieved it but it prints TERRIBLY. I usually use only hatchbox products (which iv never had problems with) but I loved the color of this product. I have learned my lesson, I will never deviate again.I adjusted temp, base height, cleaned and recleaned the extruder, upped the extrusion percentage, adjusted print speed, and still the absolute worst material iv used so far. It either doesnt want to adhere…

  2. If I couls give this 4.5 Stars I would. Even with my machine having an issue (ptfe tube going bad) during print this still printed pretty well. Adhesion was good and transition is pretty good. Like all transition filaments you’ll probably wish it changed a little faster.As with all silk PLA it will be a little tricky to find the right temp to run at to keep it running right and keep stringing down. Do test prints to dial it in a little.Keep in mind while looking at my…

Leave a Reply

Your email address will not be published. Required fields are marked *