Artillery Sidewinder X1 3D Printer 2019 Newest 95% Pre-Assembled 300x300x400 Model with Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection and Recovery (Silver)

SPECIFICATION
Layer Resolution:0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament:PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Machine Dimensions: 550 x 405 x 640 mm
550 x 405 x 870 mm (with spool holder)
21.65 x 15.94 x 25.20 in
21.65 x 15.94 x 34.25 in (with spool holder)
Shipping Box Dimensions: 780 x 540 x 250 mm / 30.71 x 21.26 x 9.84 in
Machine Weight: 14kg
Shipping Weight: 16.5kg
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume:300 x 300 x 400 mm / 11.81 x 11.81 x 15.75 in
Extruder Type: Titan Extruder (Direct Drive)
Power Requirement: 110V
600W max (with heated bed turned on)
Connectivity:USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type:Volcano

Product Features

  • MUCH STABLE PRINTING: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
  • RUNAWAY PROTECTION HEATBED: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
  • QUIET TO USE: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you.
  • FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you’ve run out of filament, saving you time and money.
  • FAST AND PRECISE: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.

Click Here For More Information

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Artillery Sidewinder X1 3D Printer 2019 Newest 95% Pre-Assembled 300x300x400 Model with Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection and Recovery (Silver)”

  1. Absolutely great printer! Absolutely great printer! I have purchased/built/used 10 printers now. This is the best one I’ve owned in the 3 years I’ve been 3D printing! I’m not exaggerating when I say this is without a doubt my new favorite 3D printer.Thats not to say that it is perfect. No 3D printer is. But Artillery clearly has taken a lot of care to be sure it works very well.This is without a doubt the quietest 3D printer I’ve ever owned. The one I received has the new upgraded base fan that…

  2. Faster 3d printer I ever seen I don’t usually do reviews, but this one had me intrigued and I love this printers so much so here I am.This machine checked all the boxes for me:1. Large format (300x300x400 build area) The bed is slightly over sized so it is a fully use able area.2. Volcano hotend- it appears to not be a genuine but seems to work quite well. It comes with a .4 nozzle. This works quite well but I imagine down the road I will put at least a .8…

  3. Print Beautifully So after buying my first 3d printer which I got lucky and got a version 2 of the Artillery X1 sidewinder. I fell in love with it. Not only did I love it. I found out tons of people I know want stuff done. So I bought another X1 which is a version 1. Since I knew with some work we could get it running right. With the help of Brandt Denkers (awesome guy by the way) we have got this things running really well. He set everything with the firmware changes…

Leave a Reply

Your email address will not be published. Required fields are marked *