BIQU 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer

Introduction
Electronic part is the brain of a 3D printer, and all movements are controlled by electronic parts. The Tango1.0 baord is R&D for 3D Printer,which is Based on AVR Processor ATMEGA2560 controller board.It support three different color filament, You can use a personal computer with a USB cable to control the 3D printer

Product Parameter
product name:BIGTREETECH-Tango V1.0 Dimension:150mm*75mm
Net weight:99g (No driver)
Power output: 12-24V
Support motor number: six
Support motor driver: A4988、DRV8825、TMC2100
Controller screen: LCD2004、LCD12864 and other screen
Compiled file:Arduino IDE
Firmware:Marlin
Controller software:Printrun、Repetier-Host

Product instruction
1. There are six stepper motor and five temperature sensor input interfaces;
2. Power input is 12-24V, the rated voltage of the hot bed is same as the input voltage of the power supply, the voltage of the hot bed will be 12v if the voltage of power supply is 12v,and the voltage of the hot bed will be 24v if the voltage of power supply is 24v.
3.PWM DC output (heating rods, fans, etc.); 6 outputs (1 large current, 3 medium currents, 2 small currents), driven by high performance, low on-resistance MOS transistors, LED as an indicator for each output.
4. Totally support for JTAG operation

Package List:
1xTango 3D Controller
1X USB Cable

Product Features

  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and SD expansion interface, it can achieve offline printing
  • Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “BIQU 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer”

  1. Easy, great, works! Loved the unit! Only thing I didn’t like was that the heater section for the bed doesn’t follow the same logic as a normal Rumba board. For that reason one less star. Other than that, love the dual 3 and 2 plug connectors for end stops (covers more 3d printers) and frankly I found the color coding quite useful as a reminder of what I was connecting.UPDATE: Ordered a second one after the first one blew a driver (my fault), and the second one has weird power regulation issues, Z-axis…

  2. Best controller with the most features This is unusual, but I received two bad units in a row. The original unit would go through the process of uploading the software (Marlin), but would not run it. If it did run it it would not communicate through the USB port. Assumed it was defective. Returned for a replacement. Replacement uploaded the software, but would communicate on a different baud rate than configured in Marlin. For example it was configured for 250000. Text was mangled. Found it was running at 230400. This was…

Leave a Reply

Your email address will not be published. Required fields are marked *