BIQU 3D Printer Part TFT 2.4 Inch Touch Screen Display RepRap Smart Controller Panel Similar 12864 LCD for Ender 3 SKR V1.3 MKS Gen Control Board (TFT 24 for Ender 3)

Product Description
TFT24 Touch Screen Youtube Video:
https://www.youtube.com/watch?v=TeRSGmcd8A8#action=share

Parameters
Appearance size: 105*46mm
Microprocessor: STM32F105RCT6
Input voltage: 5V

Some Important Tips for TFT 24 Touch Screen
1,When using class 12864 screen mode, connect to the motherboard’s EXP1 and EXP2, in which No touch function
2. When using serial-screen mode, connect to TFT or AUX-2 on the motherboard via RS232. Touch function run in this mode
3,The two modes correspond to different firmware, please wire according to the pattern type of flashed firmware
4,There are two choice in the listing, if you select the “TFT 24 For Rnder 3”, we will send the extra cable which can connect with Ender 3 printer directly. Otherwise,it can’t connect without a special designed cable

How to update Firmware
1,Log in the open source website of our company to download: https://github.com/bigtreetech
2,Firmware file name:
BIGTREE_TFT24_12864_(version code).bin
BIGTREE_TFT24_Serial_(version code).bin

First copy the above firmware to SD root directory, and then insert the card into the SD card slot of the board
Next please re-power the board or press the reset key, and wait for about 10 seconds before the update is completed

Packing List
TFT 24 Screen *1 Cable *3(show as picture)

Product Features

  • Using 32bit frequency 72MHz ARM level Cortex-M3 series STM32F105RCT6 Microprocessor, the performance has been greatly improved
  • UART serial screen and 12864 screen two operating modes can be selected with more higher compatibility
  • Serial-screen mode supports both SD card and USB flash drive printing
  • Easy to operate with SD card to upgrade the Firmware

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

Leave a Reply

Your email address will not be published. Required fields are marked *