3D Printed Nude Man Relaxing on Ground (MM29)

3D Printed Nude Man Relaxing on Ground. This is a limited edition. The design is one of my own creation and not available by any other seller. I will only print a very limited number of this figure in this pose and size. Great show piece for any room. The male form is a thing of beauty and meant to be shown. This statue shows a man in a beautiful pose relaxing.

STATUE DETAILS
Statue Height: 5″ (figure is sitting)
Material: PLA Plastic (Polylactic Acid)
Inside: 30% Infill (Not Hollow)
Where: MADE IN THE USA
Use: Indoor Use Only

It is considered fragile. It is a display piece and not meant to be played with. This model is free standing/sitting and does not need a base to rest on a flat surface.

This print takes several days to complete. Please take note of the processing time. This is NOT an in stock item. It is printed on demand. It will not ship until it has been completed. This is a raw print, which means, other than basic clean up and support removal, the print will be sent to you exactly how it came off the printer with no finish. You can display as is, or apply desired finish on your own.

The colors in the pictures show the gray/silver versions. Other colors not shown. The pictures does not show the glossy version, just the raw print.

Additional Information:

* 3D printing is a craft, and not a science. Every piece will have small unique blemishes. We make every effort for any piece that we sell to be as perfect as we can make it. If you are not happy, please let us know.

* The bottom of the print and any area that had supports during printing (under/over hangs) will have some rough areas. These areas are generally not seen during normal display. This is normal with raw 3D prints.

Detailed Information available on our Homepage…

3D Printer Adhesive Glue by Layerneer, Bed Weld Original, Strong Grip Reduces Warping for ABS, PLA, and PETG Filament on Heated Build Plates, 4 oz.

Do you have trouble with parts warping or coming detached from the printer bed?

Have you struggled with part removal after printing is finished?

Introducing BED WELD – ORIGINALâ„¢

BED WELD was engineered to solve these challenges by enhancing your print surface so that it grabs hold of that critical first layer when your build surface is hot, and refuses to let go with its gecko like grip. In many cases you can often print without rafts or build plate adhesion layers, saving you time and material.

Once your part is finished the coating dynamically morphs as your printer bed cools, releasing its hold so you don’t have to wrestle to get your part off.

No more chipped glass or broken parts. In most cases, your part will fully detach without the need for tools. In the event the part does remain attached it normally takes just a simple lifting of a corner using the edge of a razor as a lever, and the part easily pops off.

BED WELD comes with a unique built-in applicator that makes applying the coating a simple no mess process. The coating dries quickly to form a thin film that is not sticky, so there is no risk of getting a clogged nozzle or having residue on your finished part.

NOTE: The BED WELD coating was designed for use with heated build plates made from glass or aluminum and was optimized to work with PLA, ABS, PETG, PVA, and CPE filament types. Not recommended for use with Nylon, PP, or TPU 95A. See image for compatibility summary. Applying to build plates that have other surface coatings, such as magnetic build plates, or tape, is not recommended.

BED WELD is backed by an unconditional 90-Day money back manufacturers guarantee, so you risk nothing!

Product Features

  • THERMAL DYNAMIC COATING – No magic, just science; Parts stick at hot and release when cooled; Dries fast and non tacky so it won’t clog your nozzle with goo
  • LONG LASTING – Print several times on a single coat; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
  • LOW ODOR & WATER SOLUBLE – No harsh smells; No headaches; Easy to touch up or remove with water
  • NO-MESS APPLICATOR – Built in foam tip makes applying the coating to your build plate surface simple and it won’t accidentally spill
  • 90-DAY MANUFACTURER GUARANTEE – If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund

Detailed Information available on our Homepage…

Muscccm 15 Pcs 3D Printer Nozzle Cleaning Kit – Premium 3D Print Tweezers Removal Tool Kit Spatula Palette Knife for Cleaning Printers

Featers:

1.The needles aremade of quality stainless steel, flexible and won’t break easily, with a handlefor easily twisting.

2.The tweezershave Fine tips with non-magnetic coating. Great for repairing small wires,screws, circuit board welding.

3.Reaching where your fingers can’t.Suitable for high-density integrated circuit chip within the operation.

4.Wide suitable:Compatible with most of 3D printers on the market such as Duplicator, MakerBot,RepRap etc.

Product Features

  • 12pcs of 0.40mm nozzle cleaning needles packed in one safe container. Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears.All of the items come in a neat plastic tube to keep them well organized and safely together.
  • The tweezers comes with straight and curved shape tip are perfect for nozzle maintenance and cleaning excess support material, picking up a small object and getting into tight areas. The needles are very sharp, easy to clean your printer extruder hot end nozzle clogs or other small parts.
  • The spatula has a black ergonomic rubber comfort grip. The hardened stainless steel blades, flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them.
  • The tweezers and needles come in a stylish, neat, sturdy plastic tube with an aluminum screw lid to provide extra protection for the tool for long-lasting. Compatible with most well known 3D Printers on the market.
  • Fit on any 3D Printer 0.4mm nozzle such as Makerbot Creality, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tevo, Tarantula, Lulzbot, MK8, Reprap, E3D, V6, Volcano. Compatible with most well known 3D Printers on the market.

Detailed Information available on our Homepage…