CHPOWER Supporting Rod Set for CR-10/CR-10S, Upgraded 3D Printer Accessories for Creality 3D Printer CR-10 300 and CR-10S 300

Overview:

Making use of thick, aluminum rods and upgraded steel ball ends, each support brace can be adjusted individually as necessary, preventing misalignment between the upper and lower frame brackets that creates unwanted tension. Designed using the Turnbuckle principle, the rods can extend or contract by simply rotating the tube clockwise or counterclockwise. When finished with adjustments, just tighten the counter nuts on each rod end and they will lock securely in to place, making the frame solid and stable.

Feature:

– Brand new CR-10 upgrade 3d printer parts supporting rod set and high quality 3d accessories of Creality original.

– Designed for upgrading 3D Printer CR-10 300 and CR-10S 300 reduces the vibration made by printing, supporting rod kit makes 3d printing more stable. NOT for CR-10S4 or S5.

– Durable and well appointed, package included all the necessary parts for supporting rod set, this frame support kit will satisfy your requirement to upgrade the old machine.

– All wrapped up in a kit! These are direct upgraded parts from Creality original factory. It will make your 3D printer more stable and professional.

Package included:

4x pull rod
2x L pull rod connnector
4x Live bolts M6*35
4x M6 nut
2x Screws M6*40
8x M5*12
4x M5T nut
1x tap
1x T tapping wrench
1x 3# hexagon wrench
1x 8-10 wrench

Please note: This is only the support kit, the CR-10 3D printer is not included.

Install demo video:

Product Features

  • Brand new cr-10 upgrades 3d printer parts supporting rod set and high quality 3d accessories of Creality original. This kit is an all metal construction including the L brackets very strong. It’s a great product and does what it’s supposed to add rigidity to your printer.
  • Designed for upgrading 3D Printer CR-10 300 and CR-10S 300 reduces the vibration made by printing, supporting rod kit makes 3d printing more stable.
  • Durable and well appointed, package included all the necessary parts for supporting rod set, this frame support kit will satisfy your requirement to upgrade the old machine.
  • All wrapped up in a kit! These are direct upgraded parts from Creality original factory. It will make your 3D printer more stable and professional.
  • This cr-10 support rod is by far the easiest rods to install. It holds the printer pretty solid so you can printer super tall prints and not worry about the frame moving. Making the holes were super easy and all the parts fit perfect.

Detailed Information available on our Homepage…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “CHPOWER Supporting Rod Set for CR-10/CR-10S, Upgraded 3D Printer Accessories for Creality 3D Printer CR-10 300 and CR-10S 300”

  1. Needs an update but works great. Would like to give 4.5 stars but since that’s not allowed it gets 5 let me start by saying I was going to print my own brackets and make one but honestly the hours and material that go into it would just take way to long. This is an all metal construction including the L brackets very strong. The reason why I would give 4.5 is both ends of the rods are right hand threaded and it should have on end right and one end left hand to just be able to turn the center rod to adjust the push/pull of the…

  2. I had no issues installing on a TronXY X3S, CR10 clone. I did have to remove two screws in the base to tap the extrusion holes for bottom mount. Be careful when taping the extrusion. Back out the tap often to remove aluminum cuttings. If you are not careful, aluminum cuttings can jam the tap and you can break the tap off into the extrusion hole.I also used right angle corner brackets to better hold extrusion together. I highly recommend the additional corner brackets before the…

  3. I did a DIY support kit on my other printer and decided to avoid all the headache and pay more to get these. This is by far the easiest rods to install. It holds the printer pretty solid so now i can printer super tall prints and not worry about the frame moving. Making the holes were super easy and all the parts fit perfect. I would buy it again if I ever needed another on. It is a little pricer then if you were to do it yourself by buying all the parts but to me it was wroth it because…

Leave a Reply

Your email address will not be published. Required fields are marked *