Creality CR-10S S5 3D Printer Upgrade Dual Z Large DIY kit with Filament Sensor,Resume Printing 500x500x500mm Black Blue

CR-10S S5 Parameters:
Printing Size: 500*500*500mm
Layer Thickness:0.05-0.4mm
Nozzle Diameter: Standard 0.4mm
Printing Speed: Normal 80mm/s, Max 200mm/s
Filament Material Support: PLA, ABS need an enclosure, TPU, Copper, Wood, Carbon Fiber, etc.
Software: ProE, Solidworkds, UG,3d Max, Rhino 3D design, etc.
Layers Software: CURA, repetier – host simplify 3D
File Format: STL, OBJ, G-Code, jpg
Way of print: SD card off-line or USB connector computer directly
Machine Structure: imported special aluminum
Package Size: 64*54*31cm
Machine Weight: 17.3kg
Package Weight: 23kg

CR-10S 500mm 3d printer advantages Advantages for CR-10S 500mm: 1.Upgraded with filament sensor, pause printing after filament runs out. 2.Auto power resume printing after power off. 3.Heating bed Reinforce 4.Super building size of 500x500x500mm, reveal strength. 5.Patent technology, Suite upgrade, Stable and Reliable. 6.Printing precision is high, comparable to industrial equipment. 7.Selected quality and imported printer parts, more stable and wearable. 8.High positioning accuracy, move smoothly, print faster. Q&A: mother board V2.1, dual z stepper motors

Product Features

  • Resume Printing after power-off: CR-10S S5 could resume prints after a power outage or lapse occurs
  • Easy and Quick Assembly: only 10 minutes, just need to install the Z v suite in XY platform,then can easily install
  • Linear Bearing System: profile+pulley=zero gap fit, newest v-slot, bring high accuracy and low noise printing
  • Precision Pulley moving parts: imported polymer material processing, wear a long time
  • Industrial-grade Circuit Board: can print for 200 hours without pressure,with mature technology and stable performance

Click Here If You Need More Detailed Info…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Creality CR-10S S5 3D Printer Upgrade Dual Z Large DIY kit with Filament Sensor,Resume Printing 500x500x500mm Black Blue”

  1. What an upgrade! I have a Robo3d that I have used quite a bit. The quality of the CR10S5 is amazing in comparison.*I took apart the bed and adjusted all the wheels on the frame so that they were snug and I made sure when I moved the bed that each wheel was engaged. When I got it one of them was not engaging, it was an easy fix though. Then I tightened every screw I could see, be careful not to strip them, but you can snug them down a bit better than the factory did.Once I tightened…

  2. Excellent Large build area unfortunate un-repairable Bed leveling issues Great large build size, unfortunately the heated bed is too small. Also the bed gantry is either damaged in manufacturing (MFG) or not packaged properly. I bought three of these printers from two different sellers. two of them are defective beyond major replacement of the bed gantry. Also the MFG uses the same bed springs from the smaller models causing lack of bed calibration (leveling) to operate this printer I had to move washers from one side to the other. still did not result in…

  3. Great printer for the money but needs a lot of love before you can use it. Printer arrived with no damaged parts…packaged nicely. This is the second time I have had a printer arrive with lead screw bracket screws loose or missing. Many other bolts/nuts also loose. Print bed heater is useless. Upgraded to full size heater immediately. Gantry was way crooked/not parallel to the frame. Extruder mount screws were loose; heater block screws were loose and machining on the extruder heater block made it hard to stop PLA from oozing out around the nozzle. Unable to move…

Leave a Reply

Your email address will not be published. Required fields are marked *