Everpert 1m/3.3ft 3D Printer 12V 50W Heating Pipe Heater High Temperature Kits

Specifications:
Voltage: 12V
Power: 50W
Heating head size: approx. 6*20mm/0.23*0.78”
Heating head material: 304 stainless steel
Line length: approx. 1m/3.3ft
Line roughness: 0.5 flat
Color: As picture shown
Heating temperature: the highest 350℃
Weight: about 23g

Warm Tips:
1. The effective heating part of the single end heating tube must be kept dry.
2. The electric connector of the single end heating pipe should be placed outside the insulation layer and the heating chamber, the working voltage shall not exceed its rated value 10%, and the shell shall be effectively grounded.
3. The working environment of electric heating element, temperature is not more than 95℃, no explosive, corrosive gas.
4. The electric heating element should be stored in the dry place, not to be affected by damp.

Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Product Features

  • The electric connector of the single end heating pipe should be placed outside the insulation layer and the heating chamber, the working voltage shall not exceed its rated value 10%, and the shell shall be effectively grounded.
  • The working environment of electric heating element, temperature is not more than 95℃, no explosive, corrosive gas.
  • The electric heating element should be stored in the dry place, not to be affected by damp.
  • The effective heating part of the single end heating tube must be kept dry.
  • What’s You Get:1 x Heating Tube

Click Here If You Need More Detailed Info…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

Leave a Reply

Your email address will not be published. Required fields are marked *