Flex Magnetic Two Layer Print Hot Bed Sticker Build Surface Tape for 3D Printer Build Platform Heated Bed(180x180mm)

Note:Please make sure that the product has two parts. The blue part is the surface, another part back with 3m adhesive which should stick on the hot bed. Or you should adjust the 90 degrees direction if there is a weak magnetic

Specification:
Size: 180mm x 180mm
Colour: blue

Package:
1 x A Magnetic Hot Bed Sticker
1 x B Magnetic Hot Bed Sticker

Product Features

  • Please make sure that the product has two parts. The blue part is the surface, another part back with 3m adhesive which should stick on the hot bed. Or you should adjust the 90 degrees direction if there is a weak magnetic
  • The sheet adheres to a print bed to help the filament stick during printing warping
  • The sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part
  • Compatible with PLA/ABS/PETG filament, allow to print surface without additional adhesives or tape
  • We advice the temperature of the hot bed should not exceed 80℃

Detailed Information available on our Homepage…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

Leave a Reply

Your email address will not be published. Required fields are marked *