[Gulfcoast Robotics] 24V Premium White LED Bar Light Upgrade for Creality Ender 3 / Ender 3 Pro 3D Printer

The 24V Premium White LED Bar Light is a complete 3D Printer lighting kit for the Creality Ender 3 and Ender 3 PRO.

Designed to outlast traditional adhesive LED strips, the LED Bar uses a rigid 3030 LED PCB. The profile housing and mounting brackets are CNC milled from from high grade aluminum alloy and anodized black to match the Ender 3 frame.

A semi transparent cover helps to diffuse light, providing a soft, bright glow to illuminate the machine’s build plate. Equipped with a dial based dimmer switch, you can control the brightness levels or turn it off when desired.

Plug-and-Play Installation

No soldering or crimping is required. Just mount the pre-assembled LED Bar Light to the top of the frame, using the included (2) mounting brackets and M5 hardware on each end. Plug the yellow XT60 pass through connector in to your existing XT60 Power Supply connector and your finished.

Ender 3 LED Bar Light Details

  • Color: White
  • Temperature: 6000 – 6500K
  • Luminosity: 800 Lumens
  • Voltage: 24V
  • Current: 0.37A
  • Power consumption: 8.4 Watts
  • LED Bar length: 260mm

Package Contents

  • (1) 24V LED Bar with Dimmer Switch and XT60 pass-through harness
  • (2) M5x8 Socket head screws
  • (2) Drop-in M5 T-nuts

Product Features

  • Complete LED Lighting Kit for the Creality Ender 3 and Ender 3 PRO
  • Easy Installation – Takes less than 5 minutes to setup and use
  • No Soldering Required – XT60 pass through connector plugs in to the existing Power Supply cable
  • Dial Based Dimmer Switch – Control the brightness or turn off the LEDs
  • Designed and Manufactured by Gulfcoast Robotics – US Based Business

Detailed Information available on our Homepage…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “[Gulfcoast Robotics] 24V Premium White LED Bar Light Upgrade for Creality Ender 3 / Ender 3 Pro 3D Printer”

  1. Great Quality Light with a Few Improvements Needed Initial thoughts after having this installed for a week. 1. Love the variable light adjustment it makes it easy to prevent reflection off printed objects that are clear or white 2. The cord is about 3-4 inches too short. You effectively need to wrap it around the PSU in such a way it can’t snag the x axis as your build surface moves, 3. The light does get a little warm not hot but definitely can tell when it’s been on 4. Because there is no angle adjustment on the light it does cast shadows so…

Leave a Reply

Your email address will not be published. Required fields are marked *