[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.

Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor.

NTC 3950 HEX thermistor features:

M3x0.5 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block.
Wiring insulation: fiberglass.
Wiring length: 130mm.
Connector type: JST XHP.
NTC 100K thermistor 3950K beta A value.
Use TEMP SENSOR number 11 in Marlin.
High accuracy: 1%.
Resistance value at 25°C=100K

Package contents:

1 x HEX stud NTC 3950 100k Thermistor for Wanhao / Maker Select.

Product Features

  • Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
  • Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
  • Easy to mount with M3 HEX stuв
  • Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
  • Designed and manufactured by USA Company

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.”

  1. If nothing else, get this for ease of installation This was the easiest upgrade I’ve installed so far.One thing that bit me was the thermistor type. This is clearly stated in the product description: “Use TEMP SENSOR number 11 in Marlin.” I overlooked this. Default in ADVi3++ firmware is 1. Comparing the ADC lookup tables in the ADVi3++ source, the value for 230C using temp sensor 1 is the same value as 250C using temp sensor 11. In attached graph, horizontal axis is ADC Values (0-1024), vertical axis is temperature. The divergence…

Leave a Reply

Your email address will not be published. Required fields are marked *