Pxmalion Flexible TPU 3D Printers Filament, 1.75mm, Clear, Accuracy +/- 0.05mm, Net Weight 1KG(2.2LB), Compatible with Most 3D Printers

Features:

– Flexible in nature. It can bend easily without any effect on the design, strength and durability.
– Have the ability to adhere well to most surfaces such as glass, aluminum, kapton tape, and blue painters tape.
– Resistant to oil, grease and abrasions.
– TPU is also a good material to be used in the outer cases of mobile devices such as tablets and phones.

Specifications:

– Material : Rep-Flex TPU – Vacuumed Sealed with desiccant
– Color: Clear
– Shore hardness: 85A
– Weight: Filament net weight 1 KG (approximately 2.20 lbs)
– Diameter: 1.75mm (+/- 0.03mm)
– Roundness: 1.75mm (+/- 0.03mm)
– Recommended extruder temperature: 210 – 230°C
– Recommended platform temperature: 30 – 40°C

Package Content:

1x Pxmalion 1.75mm Flexible(TPU) Filament

Product Features

  • Material: Flexible TPU; Color: Clear; Net Weight: 1KG(2.2LB); No bubbles, dust and dirt free;
  • TPU flexible filament is a soft bendable plastic that retains its shape and form.
  • Thickness 1.75mm; Diameter tolerance: +/-0.03mm, the stability control is highly assured;
  • Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape.
  • Comes in vacuum sealed plastic bag and Pxmalion Customized Package Box with user- friendly opening;

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Pxmalion Flexible TPU 3D Printers Filament, 1.75mm, Clear, Accuracy +/- 0.05mm, Net Weight 1KG(2.2LB), Compatible with Most 3D Printers”

  1. Hard to adhere, not for newbies or impatient makers. Arrived quick and seems good quality stuff however tried several settings and can’t get this stuff to stick to the bed. No matter the temp of the bed (tried from room 20oC to 60oC) or the hot end temp (from 190 to 220oC) it don’t pick adhesion on buildteck, blue tape and some with UHU stick prepared surface. Only stick to the hot end nozzle. Lowered the speed to 5mm/s and some adhesion but lose track on the suface tend to pull the parts that stick. Definitively not for newbees or people short…

Leave a Reply

Your email address will not be published. Required fields are marked *