STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector for DIY CNC/ 3D Printer/Extruder

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).

Electrical Specification

*Manufacturer Part Number: 17HS15-1504S-X1
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 45Ncm(63.74oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.4mH ± 20%(1KHz)

Physical Specification
*Frame Size: 42 x 42mm
*Body Length: 39mm
*Shaft Diameter: Φ5mm
*Shaft Length: 24mm
*D-cut Length: 15mm
*Number of Leads: 4
*Lead Length: 1000mm
*Weight: 280g

Connection

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5 PCS, High torque Low noise
  • Nema 17 stepper motor with step angle 1.8deg
  • Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
  • Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
  • Build with 1m Pin Connector

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector for DIY CNC/ 3D Printer/Extruder”

Leave a Reply

Your email address will not be published. Required fields are marked *