0.4mm Drill Bits – 3D Printer Nozzle Cleaning Kit – Stainless Steel, 4.1″ Length (5-Pack)

Package Included: 5 x 0.4mm Needle Drill Bits.

Product Features

  • Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.)
  • Bit diameter: 0.4mm; The bit length:7.5cm; The length of shank: 3cm; Total length: 10.5cm. Material: Stainless Steel.
  • Good toughness and not easy to break off.
  • Package Included: 5 x 0.4mm Needle Drill Bits.
  • 30 DAY MONEY BACK GUARANTEE – All PAGOW customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfied for any reason.

Click Here If You Need More Detailed Info…

Ivelink MK8 Extruder Part Assembled Hot End + 0.4mm Nozzle for RepRap 3D Printer 1.75mm Filament (12V 40W Heater)

12V,40W heater. DIY hotend requires heat sink to operate properly – metal base, aluminum block, or any other type of cooling device

Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw

Feature

-30mm long stainless PTFE lined barrel
-NTC 3950 100K pre-wired thermistor
-Low profile: only about 43 mm high
– Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market
-This will give you good selection of nozzle orifice diameters

NTC 3950 Thermistor parameters

– Small Size: 1.25mmx2.0mm glass bead
– High accuracy: 1%
– Resistance value at 25C=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter

Package Including

6 * 0.4mm brass nozzle
1 * Stainless updated barrel tube
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistor

Product Features

  • Assembled mk8 extruder Reprap Prusa I3 3D Printer
  • Stainless updated barrel tube for trouble free, low friction print,much solid quality
  • Pre-wired NTC3950 thermistor to the updated heater block
  • Use it with heatsink or cooled metal base(Cartridge heater:12V,40W)
  • Plenty of MK8 clone nozzles compatible with this hotend – nozzle replacement is easy

Visit The Website For More Information…

Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass Color: Brass Quantity: 10 pc Length: 12mm Screw thread: M6 x 1.0 Caliber: 0.4mm Feature: 1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force. 2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder. 3.This nozzle makes printing with PLA easier. Package includes: 10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…