Glarks 29Pcs 3D Printer Nozzle with Nozzle Replacement Tool Kit, 6Pcs 0.2mm,0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm Brass Nozzle and 18Pcs Cleaning Needles and 3Pcs Nozzle Change Tool with Tweezer

Glarks 29Pcs 3D Printer Nozzle with Nozzle Replacement Tool Kit, 7Pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm Brass Nozzle and 18Pcs Cleaning Needles and 3Pcs Nozzle Change Tool with Tweezer

♣【Specification:】
✈ Extruder nozzle material: Brass
✈ Nozzle thread: M6
✈ 7mm screw socket fit for E3D nozzle
✈ 17mm wrench fit for 16x16mm heat block

【Package Include:】
17mm flat wrench x 1
Dual head socket wrench x 1
7mm socket x 1
Handle x 1
0.2mm extruder nozzle x 1
0.3mm extruder nozzle x 1
0.4mm extruder nozzle x 2
0.5mm extruder nozzle x 1
0.6mm extruder nozzle x 1
0.8mm extruder nozzle x 1
0.2mm cleaning needles x 2
0.4mm cleaning needles x 10
0.6mm cleaning needles x 2
0.8mm cleaning needles x 2
1mm cleaning needles x 2
Tweezer x 1
Total Quantity: 29Pcs

【How to change the nozzle: 】
✿ Prepare the nozzle, spanner, wrench.
✿ Heating. Turn on the 3d printer, set the nozzle temperature to target (PLA: 80-220, ABS: 240-280).
✿ Removing. After the heat done, use spanner to hold the heat block firmly, then use the wrench to screw old nozzle out.
✿ Adding. Put new nozzle to the socket and screw nozzle in, make sure the screw in tight and the work done.
✿ Warm Prompt: When heating, the old nozzle will be very hot, please do not touch them by hands.

【Quality Assurance:】
If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.

Product Features

  • ★【What You Get:】In this 3d printer tool set, it include 1pc flat wrench, 1pc dual head wrench, 1pc 7mm socket, 1pc handle, 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm brass nozzles, 18pcs 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm cleaning needles, 1 tweezer total 29pcs are well packed in a case.
  • ★【Extruder Nozzle:】Come with 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm nozzles, high quality brass material, m6 thread. Compatibility for Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer.
  • ★【Pratical Wrench:】Set include 1 flat wrench which open mouth width is 17mm, a 7mm socket fit for E3D nozzle, a mini socket wrench and a handle for you to change out a nozzle. They will fimly hold and without damage to the heat block, no yanking on frail wiring.
  • ★【Cleaning Needles:】Come with 18pcs 0.2mm, 0.6mm, 0.8mm, 1mm cleaning needles, each for 2pcs, 0.4mm for 10pcs. They are stored in 2 round tube. Which are used for cleaning 3D Printer nozzles and solve the filament clog problem, remove excess filament quickly.
  • ★【Quality Assurance:】If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.

Click Here If You Need More Detailed Info…

44PCS 3D Printer Nozzles MK8 Extruder Head for Creality CR-10 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm

44 Pieces MK8 3D Printer Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Creality CR-10

Product Features

  • Package Include: Total 44pcs MK8 3D printer nozzles, 0.2mm4pcs, 0.3mm4pcs, 0.4mm20pcs, 0.5mm4pcs, 0.6mm4pcs, 0.8mm4pcs, 1.0mm4pcs.
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
  • Out Thread: M6
  • Material: Brass

Visit The Website For More Information…

Artillery Sidewinder X1 3D Printer 2019 Newest 95% Pre-Assembled 300x300x400 Model with Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection and Recovery (Silver)

SPECIFICATION
Layer Resolution:0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament:PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Machine Dimensions: 550 x 405 x 640 mm
550 x 405 x 870 mm (with spool holder)
21.65 x 15.94 x 25.20 in
21.65 x 15.94 x 34.25 in (with spool holder)
Shipping Box Dimensions: 780 x 540 x 250 mm / 30.71 x 21.26 x 9.84 in
Machine Weight: 14kg
Shipping Weight: 16.5kg
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume:300 x 300 x 400 mm / 11.81 x 11.81 x 15.75 in
Extruder Type: Titan Extruder (Direct Drive)
Power Requirement: 110V
600W max (with heated bed turned on)
Connectivity:USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type:Volcano

Product Features

  • MUCH STABLE PRINTING: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
  • RUNAWAY PROTECTION HEATBED: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
  • QUIET TO USE: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you.
  • FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you’ve run out of filament, saving you time and money.
  • FAST AND PRECISE: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.

Click Here For More Information