3D printer NTC Thermistor Temp Sensor 100K for Reprap Prusa i3 Comgrow

Package included: 5pcs thermistors
Application : Heated bed or extruder of Reprap Prusa I3 3D Printer
Resistance value at 25°C=100K
Thermistor: small size 1.25mmx2.0mm glass bead
Wiring insulation: high temperature Teflon/PTFE.

Product Features

  • Use for heated bed or extruder
  • It has 2 pin female connector
  • Wire length: 1m/39.4 inches
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%

Detailed Information available on our Homepage…

5Pcs 100K ohm NTC 3950 Thermistors Sensors with Cable 3D Printers Parts for RepRap 3D Printer Extruder Heated Bed pre-wired or Hot End

Pack of 5PCS
Popular low cost thermistor for RepRap 3D printers
Temperature sensor 100KΩ accuracy of ± 1%
Wiring length: 1 meter
Use it with heated bed or extruder
Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring

Product Features

  • B Accuracy: ±1%
  • Temperature Range: -40℃~+300℃
  • Max Rated Power: 45mW
  • Resistance Temperature Coefficient: -2~-5%/℃
  • Suggested Parameters: R25℃=100K B25/50=3950K(±1%)

Visit The Website For More Information…

CHPOWER 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10)

Cartridge Heater:

● Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
● The heating wire inside which is wound onto a ceramic core
● The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
● The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Cartridge Heater Application:

● Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
● Semiconductor chamber heating, semiconductor wafer lead connection, semiconductor wire and die bonding
● Freeze protection and deicing of equipment in cold climates or applications ● Humidity Control
● Patient Comfort heating used in medical devices
● Mold die and platen heating
● Seal bars used in packaging equipment
● Test sample heating in gas chromatography

Thermistor Specification

● For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C … + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C

Included:

5x 12V Cartridge Heater with 1.0m Wire
5x NTC Thermistor 3950 100k
1x Allen Wrench

Product Features

  • Cartridge Heater Material: 304 Stainless Steel, Voltage: 12V, Power: 40W. Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring
  • Thermistor Color: White, support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration. Temperature sensor 100KΩ accuracy of ± 1%
  • The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .
  • Cartridge heater is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.

Detailed Information available on our Homepage…