CCTREE 10pcs MK8 Extruder Nozzle For 3D Printer Makerbot Creality CR-10 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm

Specification:13mm*6mm
Material: Brass of National standard
Weight:2g
Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm
Hexagon Diameter:6mm
Screw Thread :M6
Input Diameter: 1.75mm

Package Included:
10x nozzles
Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm
Each size 2pcs

Product Features

  • Input Diameter :1.75mm
  • Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm
  • Material: Copper (Brass)
  • 10Pcs Extruder Brass Nozzle
  • 5 different size (each size 2pcs)

Click Here For More Information

Kweiny Heat Insulation Cotton and PTFE High Temp Tape for 3D Printer Makerbot Hotend Heater Block | 10PCS Cotton and A Roll of Tape for Extruder Parts Tool Kit

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

Size:
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm

package including:
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape

Product Features

  • Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
  • High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
  • Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
  • Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
  • Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE

Visit The Website For More Information…

Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)

MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/40W
Material: Aluminum and Stainless Steel and Brass
Extra Nozzles: 7*0.4mm, 1*0.2mm, 1*0.3mm, 1*0.5mm
Extra Tube: 10x 30mm Length Extruder 1.75mm Tube Compatible with 1.75mm PLA ABS 3D printer.

Product Features

  • Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament, including 0.4mm(7pcs), 0.2mm(1pc), 0.3mm(1pc) and 0.5mm(1pc).
  • 12V/40W high temperature resistance heater catridge(wire length 1M/39.4inches), operating temperature range:0~+280°C (0~+538°F)
  • Aluminium heater block 20*20*10mm, comes with a necessary screw. Working perfectly with everyday filaments like PLA and ABS. Note: heat block inner hole for set screw: M6 and M3.
  • 30mm Length Extruder 1.75mm Tube, made from Aluminum. Compatible with 1.75mm PLA ABS 3D printer. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish.
  • You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can’t be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc.

Visit The Website For More Information…