BIGTREETECH DIRECT BTT SKR Mini E3 V1.2 Control Board + TFT35-E3 V3.0 Touch Screen Compatible TFT35 12864LCD Display WiFi 3D Printer Parts for Creality Ender 3


Introduction:
【BIGTREETECH SKR-mini-E3 】motherboard is the 3D batting of ShenZhen BigTree Technology CO.,LTD
An ultra-silent, low-power, high-quality 3D printer master board launched by the printing team.

Specially for Ender 3 printer to update.

More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3

【BIGTREETECH TFT35-E3 V3.0】 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing
team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Product Features

  • 【 SKR MINI V1.2】: Perfect upgade of Ender 3 machine motherboard
  • 【 SKR MINI V1.2 Stepper motor】: Integration of TMC2209 UART Mode
  • 【TFT35 E3 V3.0】:Touch Screen compatible 12864LCD Display
  • 【 SKR MINI E3 Firmware】: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3
  • 【TFT35 E3 V3.0 Firmware】:https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Visit The Website For More Information…

BIGTREETECH TFT24 V1.1 Touch Screen Display Compatible 12864LCD 3D Printer Parts VS MKS TFT2.4 for SKR PRO SKR V1.3


※【Introduction】: BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.

※【Product Advantages】:

1 ) ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
2 ) Upgrade the firmware by SD card. It is easy and convenient to operate.
3 ) This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
4 ) Serial port screen mode supports two printing modes: SD card and U disk.

※【Product Parameters】:
Appearance size: 105*46mm
Installation size: detail information in TFT24-V1.1-SI
Microprocessor:STM32F105RCT6
Power Input:DC5V

1) When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2) When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. In this mode, there is touch function.
3) The two modes correspond to two different firmwares, please connect wires according to the mode type of the flashed firmware.
※【Notes】:
1. The name of the firmware file in the SD card cannot be changed. (including capital and small letters)
2. Wiring process must be under the precondition of power outages. Users must check the correct connection of the circuit and the correct insertion of the drive before turning on electricity.
Pay attention to the wiring sequence and do not insert the wire inversely. Please refer to PIN file for detailed line order. If you have any questions, pls fell free to contact with us 【bigtreetech-us(Mailbox symbol)outlook.com】change Mailbox symbol to @

Product Features

  • ✓1.【Appearance size】: 105*46mm
  • ✓2.【Installation Size】: 100.08*41.1mm
  • ✓3.【Working modes】 :UART Serial Port Touch Screen and 12864 LCD can be selected;Microprocessor: STM32F105RCT6
  • ✓4.【How to connect with the SKR series or MKS series board】: https://www.youtube.com/watch?v=TeRSGmcd8A8
  • ✓5.【TFT24 V1.1 Manual and Firmware/Hardware】: https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1

Visit The Website For More Information…

SainSmart Megatronics + A4988 + Heatbed Endstop 3D Printer Kit for Reprap Arduino Mega 2560 UNO R3 (With Motor, 12864LCD)

Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.

SainSmart Megatronics LCD12864 is 100% compaitble with original design .You can
turn on the light time to do long or short form of the adjustment TRIMM R4100K
from 10 seconds to 2 minutesIf you use a print job at night and parts
department, which means that the new modifications LCD backlight would be
suitable for youLED background light control circuit, a small function of
intelligent controller, With pin short time to decide on all LED turn or
steering 30 seconds

SainSmart Mechanical Endstop perfect for any 3D
printer also for use on CNC machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next 3D printer project! Board comes fully assembled and tested.The bare socket is available.

MK2B is the latest and the best type of heatbed, compatible with all Prusa and Mendel 3d printer variants.

Package List:

1 x Megatronics board

6 x A4988 driver

1 x LCD 12864 With Controller

3 x Mechanical Endstop with cable

1 x Heatbed MK2B

5 x NEMA 17 Stepper Motors

Note: Documentation for your reference:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-029-105/Megatronicsv2TestFirmware.rar

Product Features

  • This is the new SainSmart 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer.
  • You will have a complete set of Sainsmart’s most common and useful electronic components.
  • You may learn about Sainsmart through using these basic projects.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Megatronics is based on many famous open-source products including: Arduino Mega 2560, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.

Visit The Website For More Information…