PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) – 1.5 Meters

Bowden line teflon tubing for 1.75mm filament. 4mm OD 2mm ID. Generally used with a PC4-M6 type push-in fitting. Package contents: 1 x 1.5 Meter PTFE/teflon tube.

Product Features

  • 2mm ID/ 4mm OD Bowden Tube for 3D Printers
  • White Teflon material, 1.5 Meter length
  • Withstands temperatures up to 260C
  • Density: 2.15-2.20g/cm3
  • Packaged in plastic without ties to avoid forming tight loops in storage!

Visit The Website For More Information…

3D Printer 2.0mm Kit Clogged Extruder Nozzle .2mm .25 .3mm .35 .4mm .45mm .5mm 10pack bits + nozzles .2 .3 .4 .5mm + Tool MK7 MK8 Makerbot RepRap Felix 3.0 3.1 Universal nozzle 1.75mm filament ABS PLA

3D Printer Kit Extruder Nozzle Head Cleaner Bits 1 each .2mm(2qty) .25mm(2qty) .3mm(2qty) (1 each) .35mm .4mm .45mm .5mm + 4 nozzles 0.2mm 0.3mm 0.4mm 0.5mm + Nozzle Cleaning Tool for MK7 MK8 Makerbot RepRap print nozzle for 1.75mm filament ABS/PLA printers

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

The 3″ in length 2.0mm extruder cleaner bit is the perfect way to clean the extruder channel when it becomes clogged or filament starts to build up on the walls of the extruder.
**The 2.0mm nozzle will fit in the 1.75mm filament channel. It will not damage the channel unless the user has channel that funnels at the end and they try to FORCE it through. Please use patience and caution and your printer will be printing like new again soon!
** Both bits fit in the 3.5″ pin vise tool included!

THE NOZZLES: 1 each: 0.2mm 0.3mm 0.4mm 0.5mm
Print Head for MK7 MK8 makerbot RepRap print nozzle for 1.75mm filament ABS/PLA printers

THE TOOL
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 4″ long.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • Nozzle AND Extruder jams
  • 3.5″ Bit Holding Pin Vise with 3.175mm and 2.0mm chuck
  • 4 quality brass nozzles, (1 each) .20mm .30mm .40mm .50mm

Visit The Website For More Information…

3D Printer Kit Clogged Extruder Nozzle (2each) .2mm .3mm .4mm .5mm bits + 2.0mm bit + nozzles .2 .3 .4 .5mm + Tool MK7 MK8 Makerbot RepRap Felix 3.0 3.1 Universal nozzle 1.75mm filament ABS PLA

3D Printer Kit Extruder Nozzle Head Cleaner Bits 1 each (2each) .2mm .3mm .4mm .5mm + 4 nozzles 0.2mm 0.3mm 0.4mm 0.5mm + Nozzle Cleaning Tool for MK7 MK8 Makerbot RepRap print nozzle for 1.75mm filament ABS/PLA printers

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

The 3″ in length 2.0mm extruder cleaner bit is the perfect way to clean the extruder channel when it becomes clogged or filament starts to build up on the walls of the extruder.
**The 2.0mm nozzle will fit in the 1.75mm filament channel. It will not damage the channel unless the user has channel that funnels at the end and they try to FORCE it through. Please use patience and caution and your printer will be printing like new again soon!

THE NOZZLES: 1 each: 0.2mm 0.3mm 0.4mm 0.5mm
Print Head for MK7 MK8 makerbot RepRap print nozzle for 1.75mm filament ABS/PLA printers

THE TOOL
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 3.5″ long.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • Nozzle AND Extruder jams
  • 3.5″ Bit Holding Pin Vise with 3.175mm and 2.0mm chuck
  • 4 quality brass nozzles, (1 each) .20mm .30mm .40mm .50mm

Detailed Information available on our Homepage…