CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Red

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 2.85mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. It is the ” default ” recommended material for many desktop 3D printers. It has the following characteristics:

• Good toughness high strength, high stiffness
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
•Accurate diameter: 2.85mm, variations + /-0.05mm, roundness +/-0.03mm

Product Features

  • 2.85mm diameter, 1kg net weight, PLA Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • PLA (Polylactic Acid) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 190 – 220°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…

BuMat PLADG 1.75mm 2.2lbs Dark Green Filament Printing Material Supply Spool for 3D Printer

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

Product Features

  • 1.75mm PLA at 2.2 lb. (1KG)
  • User defined melting temperature at between 160 – 180 C
  • Diameter of the filament: 1.75mm
  • Easy to use and performs well on most prints
  • Air Tight Sealed in a plastic bag

Check Out Our Website For Details…

CCTREE 1.75mm ABS 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs) White

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

ABS (Acrylonitrile butadiene styrene) is an oil based filament and has a higher melting point than PLA. ABS filament is commonly used in 3D printing. It has the following characteristics: 

• Softer than PLA, but high strength, good toughness; 
• Density is small, when printing larger volume model lighter, save money; 
• Cost-effective, can be processed in wide range temperature; 
• Accurate diameter: 1.75mm, variations + /-0.05mm, roundness +/-0.03mm;

Product Features

  • 1.75mm diameter, 1kg net weight, ABS Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 220 – 250°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…