ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation with 2.8” Smart Touch Color Screen Off-line Print 4.53″(L) x 2.56″(W) x 6.1″(H) Printing Size

Worry-free customer service from Anycubic Technology: For any questions you could contact our salesman on Amazon to get full supports. User tutorial video: Technical specification: Operating System:ANYCUBIC Photon Screen: 2.8-inch touch screen Slicer software: ANYCUBIC Photon Slicer Connection: USB Printing: Technology: LCD Light-source: UV integrated light wavelength 405nm) XY DPI: 47um(2560*1440 Z axis resolution: 1.25um Layer resolution: 25 ~ 100um Printing speed: 20mm/h Rated Power: 40W Physical parameter: Printer size: 220mm*200mm*400mm Printing volume: 115mm *65mm *155mm (4.52″*2.56″*6.1″) Printing material: 405nm photosensitive resin N.W: 7.2kgjyhwqqw G.W: 9.5kg Cautions: 1.Avoid direct contact with skin when handling the resin. Flush with plenty of water if contact by accident. 2.Pour resin back from the vat to storage bottle if the printer will not be used for over 2 days. 3.Ensure there is no solid residuals from last print when start new print. 4.Use tissue to clean the vat when change resin. 5.The printed objects can be further hardened under sun-ray or UV-light source. Package content: 1* ANYCUBIC Photon 3D printer 1* Resin *250ml 1* USB memory 3* Rubber Gloves 1* Set of kits 1* Power cord 1* Power supply 1* Scraper 1* Breathing Mask.

Product Features

  • 1. Intelligent: Colorful touch screen equipped with Photon system bring new function.You can pre-view the model in SD card like you saw pictires in Windows OS.Real-time display printing process function is available now.
  • 2. Precision: 2K LCD masking screen. 2560*1440(2k)HD masking LCD gives very fine printring details down to few micrometers
  • 3. UV-LED designed with uniformity and durability: 25W UV light source sit inside stainless steel snoot,equip with 80*80mm heat sink,to offer uniform UV light for long serving time.
  • 4. Speed: Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.
  • 5. Creative: Developped Resin Vat FEP film is part of maintenance cost in daliy printing. New resin vat was specilly designed for FEP film to adjust the tightness.

Click Here For More Information

Gowoops 3D Printer LCD Display Smart Controller 2.8” Full Color Touch Screen MKS TFT28

User Manual: http://osoyoo.com/2016/07/25/mks-tft-2-8-touch-screen/

1. Set the Boot
1) Must: After the first boot into -> Settings -> connection, select the firmware used by the baud rate, it can be used.
2) You must: Go to -> Settings -> type, select the printer type, only Delta and the other two options.
3) Optional: You can enter -> Settings -> touch screen calibration, improve the accuracy of the touch screen.

2. The Firmware Upgrade
The latest upgrade program copy to SD card root directory, be careful not to change the name, the file name must be a mkstft28.bin, insert the SD card slot, automatic upgrade after the restart.
Special Note: If you use ramps1.4 , certain external 12v power supply upgrade, MKS Series without an external 12v power supply.

3. The Power Save
Printing process into the suspended state, it can directly shut down, you can continue printing from paused next boot.

4. Power Continued to Play ( hardware MKS TFT28 V1.1 or later is supported )
Sudden power failure during printing, a reboot can continue printing from off place.
(Inability to drive the motor, the print head after a power failure will still remain in the model, it may cause defective models, if you need better power handling, power failure detection module requires and UPS )

5. Outage Detection ( hardware MKS TFT28 V1.1 or later is supported )
1) Power failure detection module signal line S connected B0 , negative positive connection B0 under – + ;
2) When the system is powered down, power failure detection module notifies the touch screen to enter the pause printing status, UPS power supply so that the print head left model.

Package Included:
1 * 2.8 Inch Full Color Touch Screen MKS TFT28 V1.2 For 3D Printer

Product Features

  • MKS-TFT28 is an independent color touch product, suitable for the use of open source 3D printers, support U disk and SD card. Support MKS Wifi module. MKS TFT can support picture customization, you can design boot logo, all button images, font color, etc.
  • P&P, do not need to modify your firmware, support Marlin,Smoothieware and Repetier.
  • Support “situation save when power breakout” function. Using this function, you should choose Pause action first before you breakout the power. When you open the power again, the printer can run from the situation before you breakout the power.
  • Can increase the custom function button. Provide continuous software upgrade, upgrade method is simple.
  • Can be used on Ramps1.4 and MKS Base , MKS Gen , MKS Mini and a series of motherboard. Boot logo and all buttons, such as interface can be designed by ourselves. MKS TFT28 can support up to 7 custom buttons, the button instructions up to 200 characters.

Visit The Website For More Information…