CNC Shield Board:
1>PWM Spindle and direction pins
2>4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
3>2 x End stops for each axis (6 in total)
5>Uses removable A4988 or DRV8825 compatible stepper drivers
7>Stepper Motors can be connected with 4 pin molex connectors or soldered in place
8>Please note that this is an unassembled kit and Basic soldering skills are needed
A4988 Stepper Motor Driver:
1>Low RDS (On) Output
2>Automatic current decay mode detection / selection
3>Mix with slow current decay modes
4>Synchronous rectification for low power dissipation
7>3.3 and 5 V compatible logic supply
8>Thermal shutdown circuitry
9>Ground fault protection
10>Load short-circuit protection
11>Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16
UNO R3 Board for Arduino:
2>USB interface: ATmega16U2
3>Operating voltage: 5V
4>Digital I/O pins: 14 (including 6 with PWM capability)
5>Analog input pins: 6
6>I-I/O pin output current: 40mA max
7>3.3V output current: 150mA max
8>Flash memory: 32kB (0.5kB used by bootloader- included)
9>Static RAM (SRAM): 2kB
11>Clock speed: 16MHz
LCD 2004 Smart Controller
Easy connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card.
Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel.
- 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module.
- The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.
- It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors.
- Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors
- This shield can make quick work for managing stepper motors in your project
Click Here If You Need More Detailed Info…
Considerate: Ship A8 3D Printer with 10m Filament, you could DIY at once after you purchase the mechine.
Frame Material: Acrylic + Lead Screw
Hotbed Material: Aluminum Alloy
Nozzle Quantity: 1
Printing color: Single
Printable Material: ABS/PLA/HIP/PRTG/TPU/Wood/Nylon/PP etc
Filament Diameter: 1.75mm
Item Size(Assembled): 50 * 45 * 40cm / 19.7 * 17.7 * 15.7inch
Item Weight: 8Kg / 17.6Lbs
Package Size: 51 * 31 * 21cm / 20.1 * 12.2 * 8.3inch
Package Weight: 8.9Kg / 19.6Lbs
Max. Printer Size: 220 * 220 * 240mm
Printer Speed: 10-120mm/s
Nozzle Diameter: 0.4mm
Layer Thickness: 0.1-0.3mm
Printing Accuracy: 0.12mm
XY Axis Accuracy: 0.015mm
Z Axis Accuracy: 0.005mm
Nozzle Temperature: Max. 260°C
Hot Bed Temperature: 50-100°C
Recommend ABS Setting: Nozzle: 230 °C Hotbed: 80 °C
Recommend PLA Setting: Nozzle: 210 °C Hotbed: 50 °C
Operating System: Windows XP/Win7/Win8/Mac/Linux
Printing Software: Cura / Repetier-host
File Type: .STL / .OBJ / G-code
1 * Set DIY 3D Printer Kit
1 * 8G SD Card (Installation Instruction Included)
1 * Card Reader
4 * Hex Wrench
1 * Open Spanner
1 * Nipper
1 * Screwdriver
1 * 10m Filament
( Ship from United State Warehouse.)
- ( Ship from United State Warehouse.) Easy installation, 5 keys 2004 LCD screen display, easy control, smart board, pause at anytime, best budget for DIY lovers
- High compatibility: supporting XYZ printing bio-degradabl and multiple filaments like ABS/PLA/HIP/PRTG/TPU/Wood/Nylon/PP etc
- Customized MK8 extruder: 0.4mm metal nozzle sophisticated technology, stable print, visual experience.
- Acrylic + Lead Screw frame is very stable.
- Ensured Quality:Aviation level aluminum plate its surface is completely flat and will NOT warp during heating process.
Click Here For More Information
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using “smart adapter” included.
This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.
1x LCD 2004 Smart Controller
1x Smart Adapter
2x FC Cable
- Popular RepRap 3D Printer LCD Controller and SD Card Reader
- Included adapter for RAMPS 1.4 board
- Fully supported by Marlin firmware
- With Smart LCD Controller you can print 3D designs without USB connection to your computer
Visit The Website For More Information…