Eryone Thinker SE Quiet 3D Printer Removable Printing Surface with Resume Print 300x300x400mm

Problem: 1. Screen for machine is blank no menu.
Poor contact – we will assist the customer to do troubleshoot problem;
Be destroyed in transit – we can offer free replacement part;
Run system is bad – we can assist customers to update the firmware to solve this issue. The link of the firmware as the following:
https://www.arduino.cc/en/Main/Donate
https://github.com/Eryone/mega2560

Problem 2: Not extruding.
3D printer is a technical product, it is not easy for new users to print successfully at first time. They may meet some problems like Not extruding.
There are some causes, and we listed these cases in our manual, to tell our customer how to find the reasons and the way to solve the problem.

Parameter
Build Volume: 300 x 300 x 400mm
Printing Precision: 0.05mm
Nozzle diameter: 0.4mm
Printing Speed: 40-145mm/s

Software

Supported Software: Repetier-Host, Cura, Simplify 3D, Slicer PE, etc
Print file types support: Gco, gcode
Supported OS: Windows / Mac / Linux

Temperature:

Nozzle temperature: Max 260??
Heat bed temperature: Max 110??

Electrical

AC Input: 100-240V
DC Output: 24V/16A
Connectivity: USB connector or stand-alone SD card printing

Package:
1 x 3D printer Thinker
1 x tool kit
1 x 8 GB SD card and USB card reader
1 x 10 meters test filament
1 x Diagonal pliers
1 x Power cable
1 x USB cable
2 x PC4-M6 fittings
1 x X-axis belt
1 x filament holder
1 x 0.4mm nozzle
1 x ejector pin

Product Features

  • Super quiet: Eryone 2560 Mother Board with TMC2208 V1.2 stepper motor driver and quite fans.
  • Glass heated bed surface build.
  • Large volume and high quality: The printing volume is 300*300*400mm, with carefully-selected components. After 3 steps assembly, the printer can print pretty well, almost no need to calibrate.
  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print.
  • Compatible with Auto-leveling sensors: With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker S firmware to enable the auto-leveling function is easily.

Click Here For More Information

Nesaila M18 Pro 3D Printer Aluminum DIY Kit with Resume Print, Removable Build Surface Plate and Upgraded 4.3inch Touch Color Screen 300x300x400mm

Color: Black
Material: Metal
Plug: US
Precision: ±0.1mm
Screen: Touch Screen
Nozzle Diameter: Standard 0.4mm
Nozzle Number: 1
Bed Temperature: 0-90℃
Support Print Material: ABS,PLA,TPU, etc.
Filament Diameter: 1.75mm
Printing Size: 300x300x400mm/11.8×11.8×15.7inch
Printer Size: 575x465x656mm/22.6×22.6×25.8inch
Main Feature:
Enjoy the satisfaction of completing your own DIY 3D printer kit.
Colorful touch screen, status display, function display, parameters all setting are clear to check.
Automatic leveling, easy leveling with both automatic leveling and auxiliary leveling modes.
Double gear extrusion mechanism, has a large extrusion to make sure feeding smoothly
Support filament runs out detection, when the material run out, it will remind you to change new filament.
Package Content:1 x 3D Printer Kit

Product Features

  • Fast Heating & Resume Print Feature: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • Semi-assmbled kit: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of Nesaila M18 Pro 3D printers as you finish putting it together. You only need about 1 hours to assemble it.
  • Filament Run-out detection : Support filament runs out detection, when the material run out, it will remind you to change new filament, saving you time and money.
  • Removable build surface plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Aluminum profile and sheet metal as frame structure [simple] [beautiful] [practical], [X] [Y] [Z] axis using rolling pulley, belt and screw transmission structure, this structure print product stability, surface fine, small platform vibration.

Click Here If You Need More Detailed Info…

Eryone Thinker S 3D Printer with Resume Print 300x300x400mm

Printing
Print technology: Fused Deposition Modeling
Build Volume: 300 x 300 x 400mm
Printing Precision: 0.05mm
Positioning precision: 12.5 ¦Ìm / 12.5¦Ìm / 2.5¦Ìm
Nozzle diameter: 0.4mm
Printing Speed: 40-145mm/s

Software

Supported Software: Repetier-Host, Cura, Simplify 3D, Slicer PE, etc
Print file types support: Gco, gcode
Supported OS: Windows / Mac / Linux

Temperature:

Nozzle temperature: Max 260¡æ
Heat bed temperature: Max 110¡æ

Electrical

AC Input: 100-240V
DC Output: 24V/16A
Connectivity: USB connector or stand-alone SD card printing

Physical dimensions
Desktop space: 510*415*625mm
Shipping dimension: 660 x 580 x 256mm
Weight: 16kg
Shipping weight: 16kg

Sound
Average operational noise: 49dBA

Package:
1 x 3D printer Thinker
1 x tool kit
1 x 8 GB SD card and USB card reader
1 x 10 meters test filament
1 x Diagonal pliers
1 x Power cable
1 x USB cable
2 x PC4-M6 fittings
1 x X-axis belt
1 x filament holder
1 x 0.4mm nozzle
1 x ejector pin

Product Features

  • Super quiet: Eryone 2560 Mother Board with TMC2208 V1.2 stepper motor driver and quite fans.
  • Maflex: magnetic and flexible PEI printing surface, easy stick to heat bed and remove from heat bed, for more detail, please see Eryone maflex.
  • Large volume and high quality: The printing volume is 300*300*400mm, with carefully-selected components. After 3 steps assembly, the printer can print pretty well, almost no need to calibrate.
  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print.
  • Compatible with Auto-leveling sensors: With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker S firmware to enable the auto-leveling function is easily.

Click Here For More Information