Aokin 3D Printer Controller Kit for Arduino RepRap, RAMPS 1.4 + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display with Adapter

Product Specs:

(1) Mega 2560 R3
(2) 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
(3) A4988 Stepper Motor Driver
A4988 is a complete microstepping motor driver with built-in translator for easy operation
(4) LCD 12864 Graphic Smart Display Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
Update High Quality Ramp Board by changing MOSFET: old MOSFET IC Model : PDF55N06 Specification£ºVDSS:60V ID:55A New MOSFET IC model: HM60N06 Specification£ºVDSS:60V ID:60A HM60N06 current up to 60A£¬More safety

Package List:

(1) RAMPS 1.4 x 1
(2) Mega 2560 R3 x 1
(3) A4988 Stepper Motor Driver with Heatsink x 5
(4) LCD 12864 Graphic Smart Display Controller x 1
(5) Smart Adapter x 1
(6) Cable x 2
(7) USB Cable x 1

Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

Note:
1. You just need to connect the computer with Mega 2560 via USB download cable when burning firmware.
2.The chip and circuit may be burnt when the power and motor driver board reversed, so please confirm twice before powering.
3.You just need to power Ramps 1.4 when testing.If you power Mega 2560, the chip will be burnt easily. So please read the introduction carefully and avoid the board being burnt due to the wrong operation.

Product Features

  • Mega 2560 control board: The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)

Click Here If You Need More Detailed Info…

Belt Pulley, 5pcs 3D Printer 2GT 20 Tooth Idle Pulley Without Teeth for Belt Width 10MM

Description:
This synchronous aluminum belt pulley is designed for 3D printer. It is an 3D printer accessory for 10mm wide belt. As an synchronous pulley wheel, you will find it perfect for 3D printer or similar projects.

Features: Adopt high quality aluminum alloy, excellently machined, finished smoothly. This pulley is for 10mm width 2GT timing belt.
Comes total 5pcs belt pulleys in one bag which you may use a long time. Perfect choice for building a 3D printer or similar projects. Also good replacement parts for old or broken 3D printer belt pulley.

Specifications:
Material: Aluminum Alloy
Type: Smooth without teeth
Height: 13mm / 0.511″
Outer Diameter: 18mm / 0.708″Inner Diameter: 5mm / 0.196″
Belt Width: 10mm / 0.393″
Quantity: 5Weight: 24g(approx.)

Package Includes:
5 x Belt Pulleys

Note:
1. Please allow 1-2mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Product Features

  • Adopt high quality aluminum alloy, excellently machined, finished smoothly
  • This pulley is for 10mm width 2GT timing belt
  • Comes total 5pcs belt pulleys in one bag which you may use a long time
  • Perfect choice for building a 3D printer or similar projects
  • Also good replacement parts for old or broken 3D printer belt pulley

Click Here If You Need More Detailed Info…

BALITENSEN 5pcs Toothed GT2 Idler Pulley 20 Teeth 5mm Bore for 3D Printer 6mm Width Timing Belt (Bore 5mm, 20 Teeth)

Specifications:
Bore Diameter: 5mm
Net Weight: 5g/pcs
Material: Aluminum

Packing list: 5 x GT2 Toothed Timing Idler Pulley 20T Bore 5mm

Visit The Website For More Information…