3D Printer Kit Clogged E3D J-Head Extruder Nozzle (2each) .6mm .8mm 1.0mm + Tool for 1.75mm filament ABS PLA

J-Head 3D Printer Kit Extruder Nozzle Head Cleaner Bits 1 each (2each) .6mm .8mm 1.0mm + bit holding pin-vise

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro drill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 3.5″ long.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • J-Head and Standard Nozzle Print Quality Solution
  • 3.5″ Bit Holding Pin Vise with 3.175mm and 2.0mm chuck
  • More sizes available

Detailed Information available on our Homepage…

3D Printer Parts Accessories Maintanance Kit ABS Blue painter’s tape Print bed removal tool Glue Sticks + (1 each) .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm Clogged nozzle bits with pin-vise

Kit Includes:

1) 2 Quantity BLUE PAINTERS TAPE PRINT BED STRIPS: Perfect for ABS filament users. PLA can sometimes require Kapton tape due to higher print bed heat. Measures: 8.25″ x 8″ (200MM x 210MM). Easily applied with any flat/straight object (ruler or id card of some sort)

2) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use.

3) (1 each) .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm Tungsten Carbide Drill Bits For regular nozzle maintanance and de-clogging (comes with an amazing 3.5″ pin-vise) Use as regular maintanance before each print or to un-clog a nozzle when prints begin to lose quality. Available in MANY sizes and combinations. Build your own pack from scratch option available.

4) 2 quantity glue sticks (7g or 0.24oz each) Glue makes removal with the tool much easier. Using the glue will also increase the life of each tape strip. Glue brand may vary but will always be 7g or 0.24oz.

About the Kit:

This kit is a must have for any 3D printer owner. It can also serve as a great start-up kit for a new printer owner. Removing prints from a print bed can be quite the hassle and can leave residue behind. Using the blue painters tape will increase the life of your print bed. The glue can be applied lightly over the tape in the area where your print will be. Use the 3″ wide tool to carefully remove your print and place it where you wish. The bits will fit perfectly in the pin-vise. Use them to un-clog nozzles or as regular maintanance before printing.

Product Features

  • 2 Painters Tape Strips 8″ x 8″
  • Print Removal Tool: 8″ x 3″
  • Nozzle Maintanance Kit: (1 each) .2mm .3mm .4mm .5mm .6mm .8mm 1.0mm Bits + Pin-Vise
  • For ABS and lower heat PLA filaments
  • 2 Glue Sticks included: Brand may vary: Always 7g 0.24oz each

Visit The Website For More Information…

3D Printer Kit J-Head Clogged Extruder Nozzle E3D V6 & V5 (2each) .2mm .3mm .4mm (1 each) .5mm .6mm .8mm 1.0mm bits for unclogging jammed nozzles and improving prints

3D Printer Kit J-head Extruder Nozzle Head Cleaner Bits (2each) .2mm .3mm .4mm (1 each) .5mm .6mm .8mm 1.0mm bits

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • J-head and Standard Nozzle clearing Kit
  • Restore print quality in minutes!
  • 2 each of smaller bits!!

Click Here For More Information