BZ 3D A4988 Stepstick Stepper Motor Driver Module  with Heat Sink for 3D Printer Controller Ramps 1.4 MKS Gen L SKR V1.3 Board for 3D Printer Part(Pack of 5pcs)

-Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 
-Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection 
-Automatic current decay mode detection / selection 
-Internal UVLO
  -Mixed with slow current decay modes 
-Synchronous rectification for low power dissipation 
-Crossover-current protection 
-Thermal shutdown circuitry 
-3.3 and 5 V compatible logic supply 
-Thermal shutdown circuitry 
-Ground Fault Circuit 
-Load short-circuit protection 
-Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16

Chip upgrade Using the latest high-quality chips, higher compatibility and better conductivity.(It is believed that only high quality products can ensure the quality of your work and bring safety to your work.)

Product Features

  • Compared with ordinary A4988, our high quality A4988 drive production process is improved again by PCB gold plate process (gold-plated pin) SMT placement machine manufacturing, non-manual welding, higher yield and more stable performance.
  • Performance upgrade: PCB covering copper process upgrade to 2oz (our high-quality copper thickness 70um, ordinary 35um), higher copper content, better heat dissipation performance.
  • Under 2A current, it can work for a long time. It is very suitable for 3D Printer, Mendel, Huxley and other machines.
  • Using the latest chips, higher compatibility and better conductivity
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates.

Visit The Website For More Information…

Upgrade Stepper Motor Driver Heatsink, FYSETC 3D Printer Parts Driver Heat Sink Aluminum Heatsinks Cooling Fin Drivers for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver-10 Pcs, Blue

Package includes: 10 Pack Heatsinks

Product Features

  • Excellent 3D Printer heat sinks and the adhesive: Work well for 3D Printer Reprap MKS Mendel Gel stepper Driver and other motherboard.
  • These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance!.
  • Size LWH: 10 x 10 x13 mm/ 0.39″ x 0.39″ x 0.51″.
  • Material: Aluminum, very light and easy to install,
  • After sales-Warrnty: We are new seller, professional 3D Printer manufacturer, if you have any good suggestion about the parts or Need more help please contact us with Email. We are appreciate, very happy to service you.

Visit The Website For More Information…

WOWOONE CNC 3D Printer Kit for Arduino Mega 2560 R3 RAMPS 1.4 Controller LCD 2004 + 6X Limit Switch Endstop 5 A4988 Stepper Driver 3D Printerarduino arduino

CNC Shield Board:
1>PWM Spindle and direction pins
2>4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
3>2 x End stops for each axis (6 in total)
4>Coolant enable
5>Uses removable A4988 or DRV8825 compatible stepper drivers
6>Compact design
7>Stepper Motors can be connected with 4 pin molex connectors or soldered in place
8>Please note that this is an unassembled kit and Basic soldering skills are needed
A4988 Stepper Motor Driver:
1>Low RDS (On) Output
2>Automatic current decay mode detection / selection
3>Mix with slow current decay modes
4>Synchronous rectification for low power dissipation
5>Internal UVLO
6>Crossover-current protection
7>3.3 and 5 V compatible logic supply
8>Thermal shutdown circuitry
9>Ground fault protection
10>Load short-circuit protection
11>Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16
UNO R3 Board for Arduino:
1>MCU: ATmega328
2>USB interface: ATmega16U2
3>Operating voltage: 5V
4>Digital I/O pins: 14 (including 6 with PWM capability)
5>Analog input pins: 6
6>I-I/O pin output current: 40mA max
7>3.3V output current: 150mA max
8>Flash memory: 32kB (0.5kB used by bootloader- included)
9>Static RAM (SRAM): 2kB
10>EEPROM: 1kB
11>Clock speed: 16MHz
LCD 2004 Smart Controller
Easy connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card.
Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel.

Product Features

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module.
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors.
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors
  • This shield can make quick work for managing stepper motors in your project

Click Here If You Need More Detailed Info…