FYSETC is a professional supplier of 3D Printers related accessories products. Include Popular Printer CR-10, Ender 3, Prusa i3, Makerbot, Anet A8, Duplicator i3, Tevo Tarantula, Maker Select V2 etc. It has a professional R&D team and high quality after-sales service to ensure that you can purchase at a reliable price. If you need more, please feel free to email or QA us, we and our engineers are very happy to assist you.
2 x 5015 fan cooling
- Brushless DC Blower Fan, best DIY replacement extruder hotend parts for Prusa i3 MK3.
- Size: About 50x50x15mm/ 1.9×1.9×0.59 inch; Cable Length: about 750mm/ 29.5 inch
- Rated Voltage: 5V, 0.35A
- Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won’t work properly.
- After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
Visit The Website For More Information…
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.
An auto leveling sensor for 3D Printer based on open-source.
Simple, high-quality, smart and precise.
Used for 3D Printer for CR-10/for CR-10SPRO/ENDER-3,
Item type:Auto Press Bed Leveling Kit
Color: As pictures.
1 set of Leveling Kit
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3
- Application: Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer(Note: Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10Scan be connected directly to computer by USB)
- Easy to Use: This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
- Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
- Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/
- Packing includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us!
Detailed Information available on our Homepage…
This is the Official Creality Ender 3 parts pack including some of the Ender 3 parts most susceptible to wear as well as some of the most common upgrades such as the hotend sock. The perfect accompanying purchase to the Ender 3, don’t forget to pick up these parts to avoid any downtime or headaches should any of these common parts need to be replaced. No longer will you need to buy 5 thermistors should one go dead, or 20 V-Slot wheels should you have only one bad bearing.
1- Upgraded hotend sock
4- Upgraded CR-10 bed-level springs for more stiff and accurate bed leveling
4- Replacement hotend nozzles (Incl. 1-0.2mm, 2-0.4mm, 1-0.6mm
2- V-slot POM wheels guaranteed to fit your Ender 3
8- Zip ties to help with any extra cable management
1- Endstop for any axis of the printer
1- Thermistor for the hotbed or hotend
4- Washers for extruder spring tensioning
1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend
Visit The Website For More Information…