Anet Aluminum MK2 MK3 12V Heated Bed Hotbed Upgrade with Hotbed Wire Cable Line for for Anet A8 A6 3D Printer, Black 220x220mm

Description of heated bed:
Product resistance: 12V voltage, the resistance of 1.2 ohms
Product voltage: 12V
Product Size: 220mm * 220mm * 3mm hole spacing 214mm
Product process: aluminum plate
Product color: black on the back, front on silver white
Product thickness: 3mm

Feature of heated bed:
1, the whole board full gold process, the cost is much higher than the spray tin plate!
2, the whole board after optical short circuit, open circuit detection.
3, heating table and aluminum substrate into one, better temperature stability.
4, the new circuit, power supply power stability.
5.Aluminum MK2 MK3 heated bed is the updated version of MK2B & MK2A.

Description of heated bed cable:
Item Type: hotbed line for 3d printer
Length : 90cm
Suitable for: Mendel RepRap i3 3D printer A8 A6 and so on.
Feature of heated bed cable:
1. Additonal positive and negative wires to utilise all of the heatbed pins and reduce load.
2. Silicone stranded wires for better flexibility and wear.

Notes:
Our Anet 3D printer motherboard support 12V hotbed, do not support 24V.
12V connection: a line then 1, another line at the same time then 2,3

Package Including:
1* 3d printer hotbed 220×220
1* 90cm heatbed wire

Product Features

  • Large-size aluminum printing platform.
  • Aluminum plate can bear higher temperature.
  • Reduce alice edge rate.
  • Size of hotbed: 220x220mm ( 8.6″ x 8.6″ square), suit for Anet A8, A6 3D Printer.
  • Length of cable: 90cm

Visit The Website For More Information…

MakerHawk 20 Sets Anti-Vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile

20 Sets Anti-vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile

Specification:
Colour: Black
material: Rubber
Function: Anti-vibration, Anti-friction to protect the printer(when the printer is in direct contact with the desktop or the ground, it will be weared out.)
Quantity: 20 sets

T Nut M3:
Material: Metal
Used for T slot 2020 aluminum extrusions
3D printer hardware accessories
Size: 10 * 10 * 5mm, Slot Width: 6mm; Thread Diameter: 3mm (m3)

How to install:
1.If you use in the 3D printer, which need the 4x Anti-vibration feet
2.Turn the YZ frame on the side and insert the antivibration foot inclined, then rotate the foot until you squish the rim inside the extrusion.
3.Repeat this process on all 4 feet. Place them 2-3 cm from the end of each extrusion.

Package Including
20 * Antivibration feet
20 * 2020 T Sliding Nut Block Square nuts M3
20 * M3 screws
1 * Wrench

Product Features

  • High Quality! Made of rubber, strong and durable, long service life.
  • Function: Shockproof, Anti-friction, to protect the printer.
  • Used for T slot 2020 aluminum extrusions, 3D printer hardware accessories.
  • .Package Contents: 20pcs anti-vibration feet, 20pcs 2020 T Sliding Nut Block Square nuts M3, 20pcs M3 screws, and a wrench as a gift for you.
  • Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!

Detailed Information available on our Homepage…

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5

Welcome to Creality 3D Printing

Package List:
Mounting screws
Aluminum MK8 extruder frame, with bored intake hole
Bushing
Spring
Brass extruder drive gear
35 mm long Teflon intake guide. (keeps filament away from Z-screw rod)
Special Bowden tube fitting (improved over stock)
For all 1.75 mm filament

Product Features

  • Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable.
  • MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.
  • Full Metal Aluminum Alloy
  • Used for 1.75mm filament
  • DIY aluminum block, need to assembly by yourself

Detailed Information available on our Homepage…