Name: 2K curable LCD screen
Purpose: UV curing printer, VR
1x2K curable LCD screen
The colors deviation might differ due to different monitor settings, please kindly understand.
Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so much.
- –The screen in the kit adopts the SHARP screen for ANYCUBIC Photon 3d printer VR projector.
- –The screen transmittance is high, the life is long under UV light.
- –Suitable for DIY projector and light curing 3d printing.
- –The screen display area is moderate, and the PPI , projection pixel or printing precision are very high.
- –The driver board is extremely stable, and there is no inherent bug in other products.
Visit The Website For More Information…
Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: WhiteMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)2) It is recommended to store the resin under 15C -35C in a sealed container. Avoid any dusty or moist environment. 2.Usage:1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to choose corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incorrect use of the resin.
- Specifically designed for led light source to achieve better printing quality
- Rapid prototyping. The resin has been developed to reduce the forming time
- Strong adhesion. The adhesion has been improved for higher print success rate
- Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT015 and fine printing details
- Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment
Check Out Our Website For Details…
Worry-free customer service from Anycubic Technology: For any questions you could contact our salesman on Amazon to get full supports. User tutorial video: Technical specification: Operating System：ANYCUBIC Photon Screen: 2.8-inch touch screen Slicer software: ANYCUBIC Photon Slicer Connection: USB Printing: Technology: LCD Light-source: UV integrated light wavelength 405nm） XY DPI: 47um（2560*1440 Z axis resolution: 1.25um Layer resolution: 25 ~ 100um Printing speed: 20mm/h Rated Power: 40W Physical parameter: Printer size: 220mm*200mm*400mm Printing volume: 115mm *65mm *155mm (4.52″*2.56″*6.1″) Printing material: 405nm photosensitive resin N.W: 7.2kgjyhwqqw G.W: 9.5kg Cautions: 1.Avoid direct contact with skin when handling the resin. Flush with plenty of water if contact by accident. 2.Pour resin back from the vat to storage bottle if the printer will not be used for over 2 days. 3.Ensure there is no solid residuals from last print when start new print. 4.Use tissue to clean the vat when change resin. 5.The printed objects can be further hardened under sun-ray or UV-light source. Package content： 1* ANYCUBIC Photon 3D printer 1* Resin *250ml 1* USB memory 3* Rubber Gloves 1* Set of kits 1* Power cord 1* Power supply 1* Scraper 1* Breathing Mask.
- 1. Intelligent: Colorful touch screen equipped with Photon system bring new function.You can pre-view the model in SD card like you saw pictires in Windows OS.Real-time display printing process function is available now.
- 2. Precision: 2K LCD masking screen. 2560*1440(2k)HD masking LCD gives very fine printring details down to few micrometers
- 3. UV-LED designed with uniformity and durability: 25W UV light source sit inside stainless steel snoot,equip with 80*80mm heat sink,to offer uniform UV light for long serving time.
- 4. Speed: Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.
- 5. Creative: Developped Resin Vat FEP film is part of maintenance cost in daliy printing. New resin vat was specilly designed for FEP film to adjust the tightness.
Click Here For More Information