Aokin 5Pcs 3D Printer Dual Z Stepper Motor Parallel Module with 100mm Cables,for Dual Double Z Axis Dual Z Stepping Motors, for Reprap Prusa Lerdge 3D Printer Board 3D Printer Parts and Accessories

Feature:
Name: 3D Printer Dual Z Stepper Motor Parallel Module
Size: 25mm*15mm
Cable Length: 100cm

Package :
5pcs Dual z stepper motor parallel modules
5pcs Cables

Product Features

  • Design – New Dual Z Stepper Motor Adapter Parallel Module Diverter Expanding Flow Board Diffuser Splitter.
  • Application – Special designed for 3D printer stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Module Size – 25mm*15mm; Cable Length: 100mm; Weight: 5g,Comes with a 4 pin cable (4 inch), easy to connect.
  • Note – Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • Pakage List – 5pcs dual z stepper motor parallel modules and 5pcs cables, easy to operate.

Visit The Website For More Information…

Aokin 3D Printer UV Resin Curing Light 405nm for SLA DLP 3D Printer Solidify Photopolymer Resin UV Resin with 10W Output Effect, DIY Curing Station or Curing Box

Aokin 3D Printer UV Resin Curing Light 405nm for SLA DLP 3D Printer Solidify Photopolymer Resin UV Resin with 10W Output Effect, DIY Curing Station or Curing Box

Description:

The lamp can be used in DIY curing station or curing box and handheld applications.

Just not stare at the light for a long time during operation and minimize skin exposure. If you have goggles, please wear an eye protection device when using this light.

The LED UV light is equal to 10 times the brightness of traditional UV lamp, 1W is equal to 10W. Power consumption is only one-tenth of the traditional UV lamp, energy-saving, and environmental protection.

This UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects solid efficiently and use less time than usual ways.

Specification:

Product power: 10W

Input voltage: AC 90-230V

Light body size: 110*85*75mm

Light emission wavelength: 405nm

Lamp type: high-bright foot UV lamp

Tips:

To achieve the best curing effect, please noted:

1. the wavelength of the photocuring agent contained in the UV glue must be the same as the wavelength emitted by the UV lamp.

2. the UV energy emitted by the UV lamp must meet the energy required for curing the UV glue. The energy of the UV light is proportional to the power of the lamp.

Package Includes:

1 x UV resin curing light

1 x mount nut and bolt

Product Features

  • Feature: this UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects cure much faster and stronger and use less time than usual ways.
  • Material: this UV resin curing light is made of aluminum alloy shell and tempered glass lampshade, quite solid construction, ensures durability. LED UV lamps can be used for up to 10,000 hours.
  • Usage: the LED UV lamp should be as close to the surface of the cured object as possible, the closer the distance, the better, within 5 cm to the light, the small size resin can be cured in 8-15 seconds, curing time is based on print size and thicker parts need more time.
  • Safety: cold light source, low heat generation, will not damage the surface of the illuminated object, suitable curing for liquid crystal surface, film printing, etc. the lamp puts out intense and consistent UV light. just not stare at the light for a long time during operation and minimize skin exposure.
  • Use: UV curing (UV glue/crystal glue/ink), Resin curing (SLA DLP print curing), Fluorescent Agent Detection, Photochemical Catalysis, Nail Art, Aging Test, UV Printing, Mobile Phone LCD Screens, Small Part Curing, Scientific Research, etc

Detailed Information available on our Homepage…

3D Printer Glue Sticks, Aokin 3 Pcs Solid Stickers for ABS, PLA, and PETG Filament on 3D Printer Platform Heated Bed

3D printer Glue Sticks, Aokin 3 Pcs Solid Stickers for ABS, PLA, and PETG Filament on 3D Printer Platform Heated Bed

Feature:

1. Help easy remove printing model: in 3D printing, first layer issues are one of the most common problems, can easily release the 3D print part once the build plate has cooled.

2. Easy use and clean: only spread on an active printing area( not the whole surface). Can wash or wet paper towel for clean 3D printer build plate after use.

3. Durable: can last use for 100+ average prints. 

4. Size: 98mm x 24mm / 3.8″ x 0.94″

5. Weight: 21g / 0.05 lb

Package includes:

3 Pcs washable glue stick

If you have any question about our product, please feel free to contact us, we will do our best for you.

Product Features

  • Purpose: strong adhesion for reduces warping for filament on heated build plates, and use it on an active printing area before printing can help us easier to remove the printing models, so solve 3D printing first layer issue.
  • Compatibility: the all-purpose glue sticks for all 3D Printer heated bed, include build surface sheet plate, aluminum and glass plate, Creality Ender 3 CR 10 Anet A8 Makerbot Prusa etc.
  • Easy to apply and spreads cleanly and evenly, safe and non-toxic, acid-free, easy use, easy clean. Can wash or wet paper towel for clean 3D printer build plate after use.
  • The glue sticks also for arts and crafts, school projects, and more. Please replace the lid when finished to prevent stored glue from drying out.
  • Each glue sticks contains 21 g/0.74 ounces of white glue, twist up for access to more as needed, can last use for 100+ average prints.

Detailed Information available on our Homepage…