Aibecy Creality 3D Ender-3 Official Full Assembled Extruder Kit 3D Printer Parts Accessories for/Ender-3s/ Ender-3 Pro 3D Printer

Features:
Creality 3D Printer full assembled MK8 extruder set For Ender-3/ Ender-3s/ Ender-3 Pro and other 3D printers.
Mainly including 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, heating tube, screws, gaskets, etc.
Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F
24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless,  prevent material leaking and blocking.
100% brand new and durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.

Specifications:
Material: Aluminum & Stainless Steel & Brass
Installation Type: External Thread Connection
Scope of Application: 3D Printer
Package Included: 2 fans + fan covers + heat block + cooling block + nozzle + throat pipe + connector + teflon pipe + heating tube + screws + gaskets, etc.
Fan: 24V 4010 Blower Fan + 24 V 4010 Cooling Fan
Heating Cable: 1m Long, φ6*2mm, 24V 40W
Nozzle: 0.4mm Size (Brass)
Throat Pipe: M6, 27mm Long ((Built-in 40cm longTeflon)
Aluminum Heat Block Size: 20 mm * 20 mm * 10 mm
Operating Temperature Range: -40 ~ +260°C (-40 ~ +500 °F)
Item Weight: 170g/ 6oz
Package Size: 22 * 10.5 * 7.5cm/ 8.7 * 4.1 * 3in
Package Weight: 253g/ 8.9oz
    
Package List:

1 * Full Assembled Extruder Kit

Product Features

  • Creality 3D Printer full assembled MK8 extruder set For Ender-3/ Ender-3s/ Ender-3 Pro and more 3D printer.
  • Mainly including 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, screws, gaskets, etc.
  • Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F
  • 24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless, prevent material leaking and blocking.
  • 100% brand new and durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.

Visit The Website For More Information…

Creality 3D Upgrades Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing for Creality 3D Ender 3 and Ender 3 pro

Please noted that the pins is clamped with long nose pliers.

Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Package included:
1× Instruction
2× Insulating tape
1× Capricorn Teflon tube
1× Nozzle Kit
4× SM 2.54 Terminal Housing
8× Pins

Product Features

  • It’s 100% Creality Original.
  • Capricorn Teflon tubing – possibly the best option for smoother filament feeding. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit for nex time.
  • With more terminal housing and pins as spare parts, in case fail installation and waste
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

Visit The Website For More Information…

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Silicone Boots and 0.4mm Nozzle


Note: These Extruder Head Sprinkler Kit Suitable for Creality Ender 3.
More stabel temperature. Non-stick silicone sock instead of the cotton isolation is convenient.And most importantly,it offers a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print. Silicone socks will keep the print head stay clean and prevent the filament from sticking to the heater block or spout.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W

– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Cable Length:115cm
Connection Method:external line connection

Package list:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
3X Silicone Boots ( as free gift)
5x 0.4mm Brass Nozzle ( as free gift)

Product Features

  • The 3D Printer Extruder Hot End Assembled Kit are original and high quality for Creality Ender 3
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality Ender 3 3D printer.
  • 3 silicone boots and 5pcs 0.4mm brass nozzle for emergency and replacement.It’s always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)

Visit The Website For More Information…