FLSUN QQ-S Pre-Assembled Delta 3D Printer Printing Size Φ255X360mm Lattice Glass Platform Auto Leveling Touch Screen Titan extruder

FLSUN-QQ-S2 3D Printer configuration :

﹥ Build Volume (L X W X H): φ255X 360 mm
﹥ Maximum layer resolution: 0.1-0.4 mm
﹥ Recomended layer resolution: 0.2-0.3mm
﹥ Printing speed: 20-150 mm/seg
﹥ Recomended speed: 50mm/s
﹥ Filament Diameter: 1.75 mm
﹥ Nozzle Diameter: 0.4 mm
﹥ XY Positioning Precision: 0.012mm
﹥ Z Positioning Precision: 0.004mm
﹥ EXtrusion temperature: 240-260°C
﹥ Recoemnded use temperature: 250°C
﹥ Operation Temperature: 5-37°C
﹥ Product Dimensions: 370X 370X 780mm
﹥ Shipping Box: 850X 480 X 150 mm
﹥ Product Weight: 14 kg
﹥ Shipping Weight: 14.5KG
﹥ Power: 360W
﹥ Input Voltage: AC 100-240V
﹥ Power output: DC 24V 15A
﹥ Filament Material: PLA ABS
﹥ Printer Case: Aluminium
﹥ Monitor Screen:Touch screen 3.2 inch
﹥ Steeper Motors: Nema17
﹥ Print Technology: FDM (Fused Deposition Modeling)
﹥ Supported File Type: STL,G-code, OBJ
﹥ Operating System: Windows XP/7/8,Mac OS
﹥ Connectivity: USB, SD card
﹥ Software: Cura,Repetier-host
﹥ Language: English
﹥ Included Gift: 2 Gb Micro SD card /extra spare nozzle,a roll pla filament Tools

About shipping:
① Modular packaging,scientific packaging design, each part will be carefully protected to ensure safe arrival.

About feedback:
FLSUN Quality Assurance/Technical Assistance:email directly or Skype(FLSUN_Zhang) Sun through Fri 18pm-9am PST(time difference):
Customers will experience hands-on fun, we supply detailed instruction and videos in the sd card
But we can’t make sure that customers won’t meet any challenge during assembly, so please contact us
Any damage of parts can be replaced for free during 1st year
We can supply first printing online guidance if you need

Product Features

  • φ255X360mm printing size
  • Noise below 50 dB
  • The power source have both 110v and 220v, please make sure power supply is correct setting
  • New auto leveling system

Click Here For More Information

Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit for Cr-10/Ender 3/Ender 3 Pro/Ender 5/CR 10S/CR-10 S4/S5/CR 20/20 Pro

Product Features

  • Awesome BLTouch Upgraded Kit: Unlike the inductive probe, Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This touch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • Widely Application: Used Creality for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and more 3D Printer(Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10Scan be connected directly to computer by USB)
  • High-Precision: BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor. BLTouch’s Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping.
  • Genuine High Quality Set: Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
  • Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/ If you have any question, please feel free to contact us!

Click Here If You Need More Detailed Info…

Creality 3D Upgraded BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality 3D Ender 3/ Ender 3 Pro/Ender 5/CR -10/CR-10S/CR-10S4/S5/CR20/20Pro

NOTE:
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.

Features:
An auto leveling sensor for 3D Printer based on open-source.
Simple, high-quality, smart and precise.
Used for 3D Printer for CR-10/for CR-10SPRO/ENDER-3,

Item type:Auto Press Bed Leveling Kit
Material: Plastic
Color: As pictures.

Packing includes:
1 set of Leveling Kit

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.

Note:
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3

Product Features

  • Application: Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer(Note: Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10Scan be connected directly to computer by USB)
  • Easy to Use: This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/
  • Packing includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us!

Detailed Information available on our Homepage…