BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2208 V3.0 UART Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※5.【TMC2208 V3.0 Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2208-V3.0

※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】: Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】: Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】: Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4. 【TMC2208 Ultra-quiet】: Stealth Chop can make the engine work in extreme silence
  • ※5.【TMC2208 V3.0 Features】: Working Mode: Dir Step ##Microplver: 1/256 ##Microplyer Mode: Up to 256 ##Driver Current: Up to 2A ##Input Voltage: 4.75-35VDC ##Logical Voltage: 3.3V-5V ##Decibel: <10dB ##RDSON: ≤0.3Q ##Motor Phase Current: 1.2A RMS, 2.0A Peak

Visit The Website For More Information…

Geeetech A10M 3D Printer with Mix-Color Printing, Adopting Open Source GT2560 V4.0 Control Board, Dual extruder Design, Build Volume with 220×220×260mm³

Geeetech A10M 3D Printer Dual extruder 3d printer

Geeetech A10M 3Dprinter, adopting open source GT2560 control board, delivers mix-color objectsand greatly enriches your 3D printing life. Keeping the good performance of itspredecessor A10, it aims to provide users with quality printout andsatisfactory printing experience.

The modularizeddesign provides you with an easier assembly experience. Its classic blue andblack color combo imparts a touch of simplicity and excellence, embodyingGeeetech’s commitment to quality products.

Keeping Prusa I33D printers’ gantry structure and with its build volume as220*220*260mm³, A10M makes the best of the building platform andenables you to view the printing details in 360°. Printing at theaccuracy of 0.1mm, it delivers objects with smooth surface finish, clear anglesand strong structure. Besides, A10M comes with filament detector andbreak-resuming capability, greatly enhancing your 3D printing experience.

Its well-designedextruder greatly reduces the risk of clogging or leaking. A10Mextruder cover features 360°ventilation design, greatly enhancing thedissipation of heat and guaranteeing excellent printing quality.

A10M extrudermotor uses a gear train of 3:1 speed ratio, amplifying input torque andimproving your printing experience. Adopting the modularized design forextruder wiring, A10M makes it easy to exchange the wire.

The V-shapedwheels and rails on each axis, made from wear-resistant aluminum profile,could, in a large measure, reduce the printing noise and offer you a quiet 3Dprinting environment.

Parameters

1)   Printing parameters

Printing technology: FDM

Printing volume: 220*220*260mm3

Printing accuracy: 0.1~0.2mm

Positioning precision: X/Y: 0.011mm   Z: 0.0025mm

Printing speed: 60mm/s

Nozzle quantity: 2-in-1-out single nozzle

Nozzle diameter: 0.4mm

Product Features

  • 【1】Mix-color printer: Dual extruder module and 2-in-1-out hotend which deliver 4 types of printings: Single color, Dual color, Graded color and Mixed color.
  • 【2】Open Source Control Board: A10M 3d printer adopts GT2560 V4.0 open source control board backed by A4988 drivers. Providing limitless space for you to modify the firmware and tinker with your printer.
  • 【3】Firmware Upgrade, the Price Unchanged: CE/FC certified power supply, motherboard upgrade, optimized screen connection, more solid bottom structure.etc. it aims to provide users with quality printout and satisfactory printing experience.
  • 【4】Fast Self-assembly: It comes with four main parts and only takes 5 steps to build it up. All wires are also attached with lables.Very simple and convenient.
  • 【5】After-Sale Services: If you have any confusions with your printer, please reach out us through E-mail/Facebook/Whatsapp.

Click Here For More Information

BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2209 V1.2 Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※【TMC2209 V1.2 GitHub/Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2209-V1.2
※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4.【TMC2209 V1.2 Working mode】 : Support STEP,DIR/UART mode , you can use these function via modify the firmware.
  • ※5. 【TMC2209 V1.2 VS TMC2208, more of these functions】: 1. Blocking rotation detection (Stallguard–TMC2209 provides a load and loss of speed detection technology)

Visit The Website For More Information…