Ender 3 Direct Drive Extruder Conversion Kit, Fits Creality Ender-3, Pro & CR-10 3D Printers, Complete Kit Requires No Firmware or Wiring Modification

The MDD v1.0 is the easiest direct drive conversion available for your Creality Ender-3 or CR-10 3D printer. Fully installed with the MK8 hot end and MK10 extruder, it’s lighter than a Titan Aero and takes just 20-30 minutes to install– with no firmware changes, no volume loss, and no cutting or splicing required.

While compatible with many hot end and extruders, the MDD was engineered to turn your stock components into a powerful direct drive system with no additional hardware needed, making it the simplest direct drive system for your Creality 3D printer.

No firmware changes are needed when using stock extruder and hot end, though we recommend starting with a new slicer profile with a retraction of 1.0mm and ooze control (coast, wipe, etc.) turned OFF.

Highlights

  • Increase print quality, simplify retractions and fix extrusion.
  • Lightweight and rigid mount lets you to print fast.
  • Print high temp and flexibles – up to 260ºC+ on the stock hot end.
  • Simplify filament changes.
  • No firmware flashing.
  • No cutting / splicing wires.
  • Works with stock extruder and hot end.
  • Fits many printable mods.
  • Simple 20 min. install (instructions provided).

Tech Specs

  • CNC machined 6063 aluminum.
  • Injection molded fittings.
  • Weighs ~478g installed (w/ hot end, extruder, motor, fan shroud, wiring, all fittings, hardware).
  • Wire harness extension included.
  • USA-made PTFE rated for 260ºC+.

Need help? Email [email protected].

 

Product Features

  • A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube.
  • Installs in 20-30 minutes with NO firmware changes, no cutting or splicing wires.
  • The PrinterMods MDD is lighter and less expensive than other direct drive systems, while offering the same or better performance.
  • No X,Y, or Z axis build volume lost. Compatible with your stock CR-10 or Ender 3 hot end and extruder, as well as many others.
  • Engineered and manufactured in the USA.

Click Here If You Need More Detailed Info…

Complete Ultimate Starter Kit for Arduino with Mega2560, LCD, Servo Motor, Sensors,Breadboard and Jumper Cable

Product List
1xMEGA 2560 Board(Arduino MEGA 2560 R3)
1xMEGA 2560 Development Expansion Board
1xMini Breadboard
1xADXL345 Acceleration Sensor
1xUltrasonic Distance Sensor
1xIR Receiver HX1838
1xRemote Controller
1xPS2 Joystick Module
1xRelay
1xStepper Motor
1xULN2003 Stepper Motor Driver Module
1xDHT-11Temperature & Humidity Sensor
1xLED Bar Graph
1xActive Buzzer
1xPassive Buzzer
1xPIR Movement Sensor
1xServo
2xAnalog Temperature Sensor(Thermistor)
1xBreadboard Power Supply Module
1×4*4 Matrix Keyboard
1xDC Motor
1xL9110 DC Motor Driver
1xLCD1602
1xDot-matrix Display
1×7-segment Display
1×4-bit 7-segment Display
1xNE555 Timer
2x74HC595
2xLight Sensor (Photoresistor)
2xTilt Switch
2xSwitch
1xRGB LED
8xRed LED
4xGreen LED
4xYellow LED
4xBlue LED
16xResistor(220O)
10xResistor(1kO)
10xResistor(10kO)
2xPotentiometer(10KO)
5xCapacitor(104)
4xCapacitor(10uF)
4xButton(large)
8xButton(small)
1xButton Cap(red)
1xButton Cap(white)
2xButton Cap(blue)
4xNPN Transistor(8050)
4xPNP Transistor(8550)
4x1N4148 Diode
4x1N4001 Diode
1x9V Battery Clip
1xBreadboard
1xUSB Cable
40xMale to Male Jumper Wires
20xMale to Female Jumper Wires
20xFemale to Female Jumper Wires
1xHeader(40pin)
1x Band Resistor Card
1x Project Box
About Arduino:
Lesson 1 Blinking LED
Lesson 2 Active Buzzer
Lesson 3 Controlling an LED with a button
Lesson 4 Controlling Relay
Lesson 5 Serial Port
Lesson 6 LED Flowing Lights
Lesson 7 LED bar graph display
Lesson 8 Breathing LED
Lesson 9 Controlling a RGB LED by PWM
Lesson 10 Play the Music
Lesson 11 LCD1602 display
Lesson 12 A Simple Voltmeter
Lesson 13 7-segment display
and so on

Product Features

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists.
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things

Click Here If You Need More Detailed Info…

Wangdd22 3D Printer Kit 14pcs/lot Cables Complete Wiring Cables Set For RAMPS 1.4 Endstops Thermistors Motor Dupont Cable

Description:
Use these cables enjoy your all of your electronic projects,Such as 3D printers, Arduino motherboards, modules and so on.

Package includes:
3pcs 70cm 2pin F-F Wires
6pcs 70cm 3pin F-F Wires
5pcs 70cm 4pin F-F Wires

Product Features

  • Cable Length:70cm.
  • Cable Attributes: Female to Female.
  • Product Color: Red, Black, Green, Blue.
  • 1 Set=3pcs 2pin+5pcs 4pin+6pcs 3pin cable
  • Product uses: Such as 3D printers, Arduino motherboards, modules and so on

Click Here If You Need More Detailed Info…