Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Installation: connecting by the outer thread of the quick fitting.
Disassemble: press and hold the blue or black end of the quick fitting and pull out the tube.
Attention: small 3D printer accessories, please keep away from children.
➤Widely applied for connecting extruders, PTFE fittings.
➤Pneumatic fitting supports turn 360 freely, Easy to install and remove.
➤2 end connections of quick fittings is able to bear greater and stronger impulse but won’t coming off.
Smooth surface, Non-stick & Corrosion resistance.
Environmentally friendly and pollution free & Durable.
Self-lubricating: can convey materials smoothly with smallest friction coefficient.
High&low temperature resistance: usable temperature -190℃~+260℃, almost unaffected by temperature.
Material: PTFE (Poly Tetra Fluoro Ethylene)
Outside Diameter: 4mm
Inside Diameter: 2mm
Inner diameter(blue end): 4mm
Material: copper and plastic
Inner diameter(black end): 4mm
Material: stainless steel and plastic
Color:black + silver
2 x 2M PTFE tube (2.0mm ID/4.0mm OD)
4 x PC4-M6 fittings
4 x PC4-M10 fittings
➤If you have any question, just click on the “Contact Seller” button or leave your question into “Customer Questions & Answers” .
- Teflon Tube: Durable material: PTFE; Length: 2m; OD 4mm, ID 2mm
- PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
- PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion
- Compatibility: compatible with all 1.75mm PLA ABS 3D printer
- Installation: connecting by the outer thread of the quick fitting, easy to install
Detailed Information available on our Homepage…
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).
*Manufacturer Part Number: 17HS15-1504S-X1
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 45Ncm(63.74oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.4mH ± 20%(1KHz)
*Frame Size: 42 x 42mm
*Body Length: 39mm
*Shaft Diameter: Φ5mm
*Shaft Length: 24mm
*D-cut Length: 15mm
*Number of Leads: 4
*Lead Length: 1000mm
Black(A+), Green(A-), Red(B+), Blue(B-)
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
- 5 PCS, High torque Low noise
- Nema 17 stepper motor with step angle 1.8deg
- Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
- Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
- Build with 1m Pin Connector
Visit The Website For More Information…
(01) Material : PVC , Metal
(02) Type : JST-XHP
(03) Pin Pitch : 2.54mm
Package Including :
XHP Housing : 160pcs
(01) 2 Pin ———- 20pcs
(02) 3 Pin ———- 20pcs
(03) 4 Pin ———- 20pcs
(04) 5 Pin ———- 20pcs
(05) 6 Pin ———- 20pcs
(06) 7 Pin ———- 20pcs
(07) 8 Pin ———- 20pcs
(08) 9 Pin ———- 20pcs
Pin Pedestal Housing : 160pcs
(09) 2 Pin ———- 20pcs
(10) 3 Pin ———- 20pcs
(11) 4 Pin ———- 20pcs
(12) 5 Pin ———- 20pcs
(13) 6 Pin ———- 20pcs
(14) 7 Pin ———- 20pcs
(15) 8 Pin ———- 20pcs
(16) 9 Pin ———- 20pcs
Terminal : 900pcs
(17) Female Pin Connector ———- 450pcs
(18) Male Pin Connector ————— 450pcs
Packing Quantity:1220pcs with plastic box High quality: Adopt environmental protection materials, cold and high temperature resistance, conductive, durable. widely used in electrical appliances, automobiles, robots, lighting, toys, PCB control panel, speakers, audio, batteries, toys, household appliances, etc.
- 1.Pin Pitch : 2.54mm
- 2.Material : PVC , Metal
- 3. Pin : 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
- 4. Quantity : 1220pcs with plastic box
- 5. Type : JST-XHP
Click Here If You Need More Detailed Info…