Tebatu Extruder Hotend Kit Aluminum Heat Block for 3D Printer CR-10 with 0.4mm Nozzle Printer Silicone Case 24V

Features:
Tip of the nozzle,aluminum heating block,Throat pipe (built-in Teflon).
MK8 Extruder Hot End kit,white wire was temperature thermistor,red wire was heating tube 12V/24V 40W.

Description:
Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1m
Voltage Power: 12V 40W,24V 40W

Package included:
1x Aluminum block
1x Heating tube (heating tube 1 m long,12V /24V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6x30mm Throat pipe (built-in Teflon)
1x Thermistor+Brass sleeve (1 meter long)
1x MK8 Blue Silicone Case

Product Features

  • Made of high-quality material
  • It is very durable
  • Easy to install and use
  • Best gift for family and friends
  • Just contact me if you have any problems

Click Here For More Information

UPEMOO Upgraded 3D Printer Parts MK8 Extruder Aluminum Drive Feed 1.75mm for Creality 3D Ender 3, Ender 5, CR-7, CR-8, CR-10, CR-10S, CR-10, CR-10 S4,and CR-10 S5

Description:

This is the MK8 style extruder feeder drive made completely from machined aluminum. this part serves as a replacement for that many 3D printers. the plastic feeder is prone to wear as the filament is pulled into the feeder if the filament is pulled from above or below the intake. it will effectively “saw” at the plastic over time. the filament intake on this model is beveled as well, to prevent scraping the filament as it is pulled into the feeder which is a common problem among some cheaper all metal feeders.

This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting. Our design gives complete support of flexibles from the intake and output ends. We’ve reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament.

It looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments.

Also included is an upgraded bowden tube fitting, which does not slip, as the stock one can. Every screw and washer we would recommend for this installation is included.

Features:

-This extruder set is great for Creality 3D printer.

-Made of high quality metal material.

-Easy and convenient to install and use.

-With high quality and durable performance.

-100% brand new

Package List:

-Mounting screws

-Aluminum MK8 Extruder frame, with bored intake hole.

-Bushing

-Spring

-Brass extruder drive gear

-35 mm long teflon intake guide. (keeps filament away from Z-screw rod)

-Special Bowden tube fitting.

For all 1.75mm filament

The fourth image is install tutorial step by step instruction,you can simply install it after check it.

Product Features

  • ✔It is Right hand extruder upgrade Kit.This high quality all aluminum construction is guaranteed to last for years!
  • ✔Upgrade from your stock plastic or 3D printed extruder feeder drive as they can wear over time, scrape filament as it is pulled into the printer, or even break when squeezed to release the filament.
  • ✔This extruder feeder drive is compatible with nearly all models 1.75mm filament of 3D printers MK8 bowden extruder frame. No need to change stepper motors or other mounting hardware.
  • ✔Great for use with any Creality 3D printer Ender 3/3Pro,Ender 5,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10 Plus.
  • ✔The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.

Visit The Website For More Information…

2020 Synchronous Belt Stretch Straighten Tensioner for CR-10 CR-10S Ender-3 Upgrade 3D Printer Parts Silver

>Specifications:
Name: 2020 aluminum profile X-axis synchronous belt stretching
Material: aluminum alloy
Surface treatment: anodizing
Color: Black,Silver

Attention:
Customers feedback:For use of the original belt,need to enlarge the space needed for the screw head on one of the sidewall machining as well as to redo a button with a much longer M5 screw

Package includes: (Without retail package)
1 x 2020 Profile X-axis Synchronous Straighten Tensioner

Product Features

  • Made of high-quality material
  • It is very durable
  • Easy to install and use
  • Best gift for family and friends
  • Just contact me if you have any problems

Visit The Website For More Information…