Tag: Diameter

Deltaprintr – Delta Go 3D Printer Masking Tape – 100 sheets – 150mm diameter – 2090 – Better than Kapton

Deltaprintr manufactures and sells these adhesive sheets for use with the Delta Go 3D Printer. However, you may use them on any 3D printer. They provide great adhesive and help prevent parts from warping. Using single sheets saves time instead of having to lay down multiple lines of tape close to each other. Made of premium quality blue tape.

Product Features

  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments (sold separately)
  • Durable construction allows for multiple uses with either the same or different filament material
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • For use with fused-filament 3D printers (sold separately)

Visit The Website For More Information…

Hestya 10 Pieces Drill Bit for 3D Printer, Flexible Stainless Steel Nozzle Cleaning Tool Kit, Diameter Specification 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm


10 Pieces drill bit for 3D printer, flexible stainless steel nozzle cleaning tool kit, diameter specification 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm

Durable to use:
Can use for heaps of times as it is made of stainless steel with good flexibility, not rust or break easily.

Enough quantity:
10 Pieces of nozzle drills in 5 sizes, applicable in your daily life, and they are held in a box, in case of missing.

Compatibility:
Matches most 3D print extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc..

Specifications:
Material: stainless steel
Bit diameter: 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm
The bit length: 2.5 cm, 4 cm, 5 cm, 6 cm, 7.5 cm
The shank length: 2.5 cm, 3 cm, 3 cm, 3 cm, 3 cm
Total length: 5 cm, 7 cm, 8 cm, 9 cm, 10.5 cm

Package included:
10 x Needle drill bits

Product Features

  • Quantity and size: 10 pieces in total, 2 pieces per specification, the needle drill bits have 5 sizes (0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm and 0.5 mm), different sizes can meet your multiple needs
  • Good material: made of stainless steel, flexible and won’t break easily; Comes with a handle, so you can easily twist it during use
  • Wide range of compatibility: compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.
  • Function: it can be applied to accurately measure the diameter of nozzle holes, you can clean the small size nozzles and other small parts by this tool kit, such as the feed gear
  • Good performance: the drill bits will clean your printer nozzles very well and make it print better

Click Here If You Need More Detailed Info…

MG Chemicals HIP17WH1 HIPS – (High Impact Polystyrene) 3D Printer Support Filament Material, 1.75 mm Diameter, 1 Kg Spool, White

HIPS – High Impact Polystyrene used commonly with a dual extruder when printing with ABS. HIPS is used to create structures impossible to make without support, dissolve away the HIPS in d-limonene without affecting the ABS object being printed. Print temperature: approximately 235°C. Print bed temperature between: 80 – 115°C.

Product Features

  • 1.75mm diameter, HIPS filament, 1 Kg Spool
  • Diameter Tolerance: 1.75mm: 1.75 +/- 0.1mm
  • Suggested print temperature ranges from 230°C – 240°C
  • Compatible with most 3D printer models
  • Soluble in MG Chemicals cat# 433 or 433C series of d-Limonene for dissolving HIPS support material

Check Out Our Website For Details…