BIGTREETECH DIRECT BTT SKR Mini E3 V1.2 Control Board + TFT35-E3 V3.0 Touch Screen Compatible TFT35 12864LCD Display WiFi 3D Printer Parts for Creality Ender 3


Introduction:
【BIGTREETECH SKR-mini-E3 】motherboard is the 3D batting of ShenZhen BigTree Technology CO.,LTD
An ultra-silent, low-power, high-quality 3D printer master board launched by the printing team.

Specially for Ender 3 printer to update.

More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3

【BIGTREETECH TFT35-E3 V3.0】 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing
team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Product Features

  • 【 SKR MINI V1.2】: Perfect upgade of Ender 3 machine motherboard
  • 【 SKR MINI V1.2 Stepper motor】: Integration of TMC2209 UART Mode
  • 【TFT35 E3 V3.0】:Touch Screen compatible 12864LCD Display
  • 【 SKR MINI E3 Firmware】: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3
  • 【TFT35 E3 V3.0 Firmware】:https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Visit The Website For More Information…

BIGTREETECH DIRECT TFT35 E3 V3.0 Touch Screen /12864 LCD Display Control 3.5 inch Support WiFi Modle 3D Printer Parts for SKR V1.3 PRO Mini E3 Ender3 CR-10


BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of
Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.

Firmware: https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

1.Product Parameters:
Appearance size:93*87mm
Installation size:Perfectly replace the original LCD screen of Ender3 printer,detail information please check TFT35-E3 V3.0 SIZE
Microprocessor:STM32F207VCT6
Power Input:DC 5V
SD card logic voltage:3.3V and 5V(Such as: support MEGA2560 main control chip motherboard, higher compatibility)

2.Product characters:
1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
2)Upgrade the firmware by SD card. It is easy and convenient to operate.
3)This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
4)Serial port screen mode supports two printing modes: SD card and U disk.
5)Reserve WIFI port, and WIFI function is realized by external WIFI module;
6)Reserve the extension port of filament breaking detection (FIL-DET);
7)Reserve the extension port of automatic shutdown after printing (PS-ON);
8)LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ;
9)TFT touch screen mode:serial port screen RS232 port;
10)2 sets of UART serial port extension ports are reserved for DIY use.

Product Features

  • 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
  • 2)Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 3)This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
  • 4)LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ;
  • 5)SD card logic voltage:3.3V and 5V(Such as: support MEGA2560 main control chip motherboard, higher compatibility)

Visit The Website For More Information…

BIGTREETECH TFT24 V1.1 Touch Screen Display Compatible 12864LCD 3D Printer Parts VS MKS TFT2.4 for SKR PRO SKR V1.3


※【Introduction】: BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.

※【Product Advantages】:

1 ) ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
2 ) Upgrade the firmware by SD card. It is easy and convenient to operate.
3 ) This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
4 ) Serial port screen mode supports two printing modes: SD card and U disk.

※【Product Parameters】:
Appearance size: 105*46mm
Installation size: detail information in TFT24-V1.1-SI
Microprocessor:STM32F105RCT6
Power Input:DC5V

1) When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2) When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. In this mode, there is touch function.
3) The two modes correspond to two different firmwares, please connect wires according to the mode type of the flashed firmware.
※【Notes】:
1. The name of the firmware file in the SD card cannot be changed. (including capital and small letters)
2. Wiring process must be under the precondition of power outages. Users must check the correct connection of the circuit and the correct insertion of the drive before turning on electricity.
Pay attention to the wiring sequence and do not insert the wire inversely. Please refer to PIN file for detailed line order. If you have any questions, pls fell free to contact with us 【bigtreetech-us(Mailbox symbol)outlook.com】change Mailbox symbol to @

Product Features

  • ✓1.【Appearance size】: 105*46mm
  • ✓2.【Installation Size】: 100.08*41.1mm
  • ✓3.【Working modes】 :UART Serial Port Touch Screen and 12864 LCD can be selected;Microprocessor: STM32F105RCT6
  • ✓4.【How to connect with the SKR series or MKS series board】: https://www.youtube.com/watch?v=TeRSGmcd8A8
  • ✓5.【TFT24 V1.1 Manual and Firmware/Hardware】: https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1

Visit The Website For More Information…