Artillery Sidewinder X1 3D Printer 2019 Newest 95% Pre-Assembled 300x300x400 Model with Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection and Recovery

SPECIFICATION
Layer Resolution:0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament:PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Machine Dimensions: 550 x 405 x 640 mm
550 x 405 x 870 mm (with spool holder)
21.65 x 15.94 x 25.20 in
21.65 x 15.94 x 34.25 in (with spool holder)
Shipping Box Dimensions: 780 x 540 x 250 mm / 30.71 x 21.26 x 9.84 in
Machine Weight: 14kg
Shipping Weight: 16.5kg
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume:300 x 300 x 400 mm / 11.81 x 11.81 x 15.75 in
Extruder Type: Titan Extruder (Direct Drive)
Power Requirement: 110V – 240V
600W max (with heated bed turned on)
Connectivity:USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type:Volcano

Product Features

  • MUCH STABLE PRINTING: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
  • RUNAWAY PROTECTION HEATBED: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
  • QUIET TO USE: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you.
  • FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you’ve run out of filament, saving you time and money.
  • FAST AND PRECISE: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.

Click Here For More Information

3pcs 3D Printer Stepper Motor Parallel Module with/w Cable for Double Z Axis Dual Z Motors for Lerdge 3D Printer Board

This module is only used for parallel connection of the motor terminals. One drive drives two motors. It is only suitable for parallel connection of small printers or small current motors. (The current is evenly divided when the same motor is used in parallel).

Package includes
3*Stepper Motor parallel module
3*Pcs cables

Product Features

  • New Dual Z Stepper Motor Adapter Parallel Module Diverter Expanding Flow Board Diffuser Splitter
  • Special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor
  • Comes with a 4 pin cable (4 inch), easy to connect
  • Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly);
  • Easy to connect

Detailed Information available on our Homepage…

Geeetech 3D Printer A10M Mix-Color Prusa I3 220×220×260 mm³ Print Size with Dual Extruder/Filament Detector/Power Resume/3: 1-Gear/Open Source Control Board

Please switch the Power Supply Unit to 115V set before turning on the printer.
If you have any question, feel free to reach out to us:
FB: www.facebook.com/joeblackttt
Email: [email protected]

User Manual link: bit.ly/GT-A10M
Color Mixer guide: bit.ly/ColorMixer

Printing parameters
Printing technology: FDM
Build volume: 220*220*260 mm³
Printing accuracy: 0.1mm
Positioning precision: X/Y:0.011mm. Z: 0.0025mm
Printing speed: 120 mm/s (max)
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament: ABS / PLA/wood-polymer/PVA/HIPS/PETG, etc.

Temp:
Max temp for hotbed: 100℃
Max temp for extruder: 250℃

Software resources:

Compatible with Windows/Mac/Linux Operating system
Control software: EasyPrint 3D, Repetier-Host, Simplify 3D, Cura, Slic3r, etc.
Remote App: EasyPrint 3D App (with an optional 3D WiFi module)
File format: .STL, G.code

Electrical:
Power supply: Input: 115V/230V; Output: DC 24V, 360W
Connectivity: Wi-Fi (with an optional 3D WiFi module), USB cable,SD card (support stand-alone printing)
Display screen: LCD 2004

Mechanical:
Frame: Aluminum profile
XY Rods: Wear-resistant aluminum profile
Z axis: Lead screw
Stepper Motors: 1.8°step angle with 1/16 micro-stepping

Physical Dimensions & Weight:
Machine Dimension: 478 x 413 x 485mm³
Shipping box Dimension: 490 x 470 x290 mm³
Machine Net weight: 7.96kg
Machine Gross weight: 9.98 kg

Please switch the Power Supply Unit to 115V set before turning on the printer.
If you have any question, feel free to reach out to us:
FB: www.facebook.com/joeblackttt
Email: [email protected]

User Manual link: bit.ly/GT-A10M
Color Mixer guide: bit.ly/ColorMixer

Product Features

  • 【1】Mix-color printing: Dual extruder module and 2-in-1-out hotend which deliver 4 types of printings, namely, single color, dual color, graded color and mixed color. A10M will greatly enrich your 3D printing life
  • 【2】Fast Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane and wiring. Simple and convenient.
  • 【3】Large printing area: With its printing area as 220*220*260mm3, A10M makes the best of the building platform and gives you a full view of the printing details.
  • 【4】Hotend kit case features 360°ventilation design: Enhancing the dissipation of heat, greatly reducing the risk of clogging or leaking and guaranteeing excellent printing quality
  • 【5】Good adhesion of printing platform: Silicon carbide glass has covered microporous surface, so that there is no need to use masked tapes on the printing plate. The excellent adhesion building platform will free you from the problems of detaching the first layer.

Click Here For More Information