Wangdd22 3D Printer J-head Dual V6 Head Extruder Hotend with 0.4mm Nozzle 12V Cooling Fan and M4 Fisheye Effector Hanging Station for 1.75mm Filament

Description:

V6 Extruder:
●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
Specification:
Type: Bowden J-head Dual V6 Hotend
Included: NTC3950 thermistors and 12V 40W heater
NTC 3950 Thermistor parameters:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Fisheye Effector:
Material: Aluminium Alloy
Scrwe size: M4
This effector fits V6 J-head hotend (bowden and wade),it can hold two J-head together.
Don’t compatible with chimera multi-extrusion hotend and V5 version J-head hotend.

Package includes:
2x long distance V6 J-head extruder with 0.4mm nozzle ,12V heater
2x 12v cooling system
1x dual head M4 effector

Product Features

  • RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
  • 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
  • This 3D Printer Dual V6 Hotend is applied for 1.75mm Filament Long-Distance Filament Bowden extruder

Detailed Information available on our Homepage…

Micromake 3d Printer Parts Kossel Reprep Plastic Injection New Auto-level Effector with J-head Nozzle Full Assembly

Description:
This is Micromake upgraded full assembly new auto-level effector, which has outstanding quality and the best performance for DIY and professional systems.
We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better.
And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.
Specifications:
The extrusion nozzle: 0.4mm
Chock: 1.75mm
The material of Print: 1.75 PLA/ABS
The flow rate of Nozzle: about 24cc / h
Sports shaft speed:40mm/s
The voltage of heating nozzle: 12V
The operating voltage of cooling fan: 12V
Heating rods: 6mm, 12V, 30Wv Net weight: 270g
Normal working temperature: 190°-230°
NOTE: Make sure the maximum temperature is less than 280°
Feature:
42mm high quality stepper motor with larger torque and less heat buildup
Special ceramic insulation cotton ensures the stability of heating; electricity-saving
Direct transmission, without the heavy gears, compact size and weight
Package list:
Plastic Injection Effector Set
Two fan(one cooling fan, one radiator fan)
E3D Extruder J-Head Nozzle

Product Features

  • Make sure the maximum temperature is less than 280°
  • The extrusion nozzle: 0.4 mm
  • Full assembly new auto-level effector outstanding quality and the best performance for DIY and professional systems.
  • And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.
  • We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better.

Visit The Website For More Information…

RepRap Champion M3 Aluminum End Effector Plate Mount for RepRap Delta 3D Printer Kossel Mini

This part can be used for various Delta type 3D Printers, such as Kossel, Kossel mini. Please consult with the supplied drawing for dimensions, mounting hole placement and thread sizes, to determine compatibility with your 3D Printer.

Please see supplied drawing for part dimensions and details.

Package contents:

1 x M3 Aluminum End Effector for Delta Type 3D printer.

Visit The Website For More Information…