Befenybay 2 PCS 3D Printer Parts Diameter 8mm Z-Axis Leadscrew Top Mount for Ender-3 CR-10 Z-Rod Bearing Holder

Size :Z-Axis Leadscrew diameter 8mm
Color :Black
Material:Plastic
Fit 2020 series Aluminum extrusion
Package:2 pcs Z-Axis Leadscrew Top Mount
4 pcs M4 T Nuts
4 pcs M4x20mm screws

Product Features

  • 【Material】 Z-Rod Bearing Holder is made of plastic
  • 【Widely Used】widely used in Creality CR-10, Ender 3 etc
  • 【Dimensions】Length: 46mm. Width: 39mm. Height: 17mm
  • 【Function】 Diameter 8mm Z-Axis Leadscrew Top Mount for 3D Printer
  • 【Package Include】2 pcs Z-Rod Bearing Holder, 4pcs M4 T Nuts, 4pcs M4x20mm screws

Visit The Website For More Information…

2 Pack 3D Printer Glass Print Bed for Ender 3-235 x 235 x 40mm – 8 Printer Bed Clips Included – Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro Tempered Glass Replacement

This listing is for a 2 pack of 3D Printer Beds made from tempered glass. The tempered glass is of superior quality to typical borosilicate plates
provided by our competitors. The tempered glass is totally flat and smooth, with no dips or pits. Tempered glass is more durable and lasts longer
than borosilicate, so you need to replace the plates less frequently. 

Unlike our competitors, you won’t have to purchase low quality black binder clips to secure the plates. We provide 8 printer bed clips that maximize
your build area and look great. 

Key Product Features:

  • Made from high quality tempered glass. 
  • Are you looking for an Ender 3 Upgrade? Perfectly fits the Ender 3, Ender 3 Pro, Ender 3X, Ender 5, CR-20, Geeetech A10, and CR-20 Pro at
    235 x 235 x 40 mm. 
  • Totally flat surface to avoid any adhesion or print quality issues.
  • Packed in custom foam to avoid any damage during delivery. 
  • 8 custom printer bed clips included. 

How to Calibrate Your New 3D Printers Glass Bed

  1. Load the glass plate into the 3D printer base and attach with the silver clips provided.
  2. Center both the bed and nozzle.
  3. Lower the nozzle until it touches the top of the glass bed. 
  4. Readjust the Z axis homing switch. 
  5. Loosen the switches and reposition. 
  6. Tighten up the switches when correctly aligned. 
  7. Carry out a print calibration check to re-adjust the bed. 

Product Features

  • 3D PRINTER PARTS AND ACCESSORIES: This listing is for a 2 pack of 3D Printer Beds made from tempered glass. 8 custom printer bed clips are also included. The 3d printer heatbeds are securely packed in custom foam. This means they won’t arrive shattered or cracked.
  • WIDE RANGE OF COMPATIBILITY: These 3D Printer Bed Plates are compatible with Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235mm print bed..
  • PRINTER BED CLIPS INCLUDED: You will no longer need to use ugly black binder clips. Not only are they poor quality, but they limit the build area. The clips included with this 3D printer surface look great and maximizemaximise your build area.
  • PERFECTLY FLAT 3D PRINTER PLATFORM: Using a rivals inferior quality 3D printer hot bed that isn’t perfectly flat can cause adhesion and print quality issues. With our tempered glass sheet you never have to worry about these problems.
  • TEMPERED GLASS PLATE: The tempered glass is of superior quality to typical borosilicate plates provided by our competitors. The tempered glass is totally flat and smooth, with no dips or pits. Tempered glass is more durable and lasts longer than borosilicate, so you need to replace the plates less frequently.

Detailed Information available on our Homepage…

BIGTREETECH DIRECT TFT35 E3 V3.0 Touch Screen /12864 LCD Display Control 3.5 inch Support WiFi Modle 3D Printer Parts for SKR V1.3 PRO Mini E3 Ender3 CR-10


BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of
Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.

Firmware: https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

1.Product Parameters:
Appearance size:93*87mm
Installation size:Perfectly replace the original LCD screen of Ender3 printer,detail information please check TFT35-E3 V3.0 SIZE
Microprocessor:STM32F207VCT6
Power Input:DC 5V
SD card logic voltage:3.3V and 5V(Such as: support MEGA2560 main control chip motherboard, higher compatibility)

2.Product characters:
1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
2)Upgrade the firmware by SD card. It is easy and convenient to operate.
3)This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
4)Serial port screen mode supports two printing modes: SD card and U disk.
5)Reserve WIFI port, and WIFI function is realized by external WIFI module;
6)Reserve the extension port of filament breaking detection (FIL-DET);
7)Reserve the extension port of automatic shutdown after printing (PS-ON);
8)LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ;
9)TFT touch screen mode:serial port screen RS232 port;
10)2 sets of UART serial port extension ports are reserved for DIY use.

Product Features

  • 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
  • 2)Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 3)This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
  • 4)LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ;
  • 5)SD card logic voltage:3.3V and 5V(Such as: support MEGA2560 main control chip motherboard, higher compatibility)

Visit The Website For More Information…