The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
Small size, easy installation, just plug and play.
100% brand new and high quality, perfect 3D printer parts.
Suitable: For Anet A8 Plus 3D Printer
Cable Length: 750mm, 2pin(1pcs); 500mm, 2pin(2pcs)
Package Size: 9 * 8 * 2.5cm / 3.5 * 3.1 * 1in
Package Weight: 23g / 0.8oz
1 * X Limit Switch Cable
1 * Y Limit Switch Cable
1 * Z Limit Switch Cable
2 * Limit Switch
1 * Limit Switch with Pulley
- The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
- The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
- Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
- Small size, easy installation, just plug and play.
- 100% brand new and high quality, perfect 3D printer parts.
Visit The Website For More Information…
3pcs Creality 3D Endstop Limit Switch with Cables for Ender 3
1. X axis endstop limit switch with cable
2. Y axis endstop limit switch with cable
3. Z axis endstop limit switch with cable
4.X axis Motor Cable 5. Y Axis Motor Cable
6. Z Axis Motor Cable 7. E Acis Motor Cable
Detailed Information available on our Homepage…
CNC Expansion Board:
-GRBL 0.9 compatible
-Runs on 12-36V DC
-4-Axis support: X, Y, Z
-It can drive 4 stepper motors, and each stepper motor only needs 2 IO ports.
That is to say, 6 IO ports can manage 3 stepper motors very well,
which is very convenient to use.
KeeYees UNO R3 Board:
-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limit):6-20V
-Flash Memory: 32 KB of which 0.5 KB used by bootloader
-Digital I/O Pins: 14 Digital I/O Pins (6 PWM outputs)
-Analog Input Pins: 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA
-SRAM: 2 KB
-EEPROM: 1 KB
-Clock Speed: 16 MHz
Tips: Find more information about Arduino UNO R3 with the Expansion Board IO Port with our tutorial.
DRV8825 Stepper Motor Driver:
-Applied for driving stepper motors up to 8.2V-45V 2.5A
-4-layer PCB board (better heat dissipation)
-6 different step resolutions:
full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Mechanical Switch Endstop:
-Length of Cable: 70 cm
-Red line — VCC (ramps of +)
-Black wire — GND (ramps of -)
-Green Line — SIGNAL (ramps in s)
1 x CNC Shield Board
1 x KeeYees UNO R3 Board
4 x DRV8825 Stepper Motor Driver with Heat Sink
4 x RAMPS Mechanical Switch Endshop
20 x 2.54mm Black Jumper Caps
1 x 1.5m USB cable for UNO R3 Board
- 【KeeYees UNO R3 Board】 KeeYees UNO R3 Board uses the same ATmega328 and ATMega16U2 as official Uno R3 and 100% compatible with the official version. It comes with free 1.5m USB cable for convenient connection.
- 【CNC Expansion Board with Free 20pcs Jumpers】This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988/DRV8825 stepper motors. The jumper caps are necessary for CNC setups. You do not need to purchase this part extra.
- 【DRV8825 Stepper Motor Driver w/ Heat Sink】DRV8825 is upgrade of A4988! It is a must-have module for 3D printers, CNCs and engraving machines. The 4-layer PCB board has better heat dissipation performance.
- 【Mechanical Switch Endstop】It uses a 22AWG wire that can withstand a current of 2A and a voltage of 300V. Better quality than traditional copper wire. It can reach the insulation temperature of 80℃. It is not easy to break, and very convenient to plug and remove.
- 【Reliable technical support】If you don’t have a CD drive, please visit our website( www.keeyees.com ) to get relevant information or can contact us on Amazon, we will send PDF Document to you.
Click Here If You Need More Detailed Info…