fosa Stepper Motor Nema 12V Stepper stepping Motor DC Electric Low Noise 42 DC Step Motor Kit with 4-lead Cables for 3D Printer Engraving CNC

Specifications:
Compatible With: for 3D Printer
Model Number: 42BYGH40
Step Angle: 1.8°
Working Voltage: 12V
Motor Shaft Length: Approx.22 mm / 0.87in
Motor Shaft Diameter: Approx. 5mm / 0.2in (D Type Shaft)
Motor Length: Approx. 40mm / 15.7in
Number of Leads: 4
Wire Color: Black(A+), Green(A-), Red(B+), Blue(B-)
Wire Length: Approx. 1m / 3.3ft
Size: Approx. 6.8 * 4.3 * 4cm / 2.7 * 1.7 * 1.6in
Weight: About 302g

Package List:
1 x 4-lead Stepper Motor for 3D Printer

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor. 

Product Features

  • Most popular model equipped with 1.8 degree step angle
  • Specially designed and suitable for 3D Printers
  • Low noise and high quality
  • Bipolar 4-wire: Black A +, Green A-, Red B +, Blue B-
  • It has a quite stable performance during work and will not loss step

Click Here If You Need More Detailed Info…

Ywillink Engraving Machine Smoothieboard 5X V1.1 Mainboard Part for 3D Printer

Feature:
Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community to run the Smoothieware firmware.
Its main design goals are:
Uses as powerful hardware as possible at the time
Can control several machine types ( 3D printers, lasers, CNC mills/routers )
Easy to setup and use
Easy to do weird, new and exciting things with
Easy to develop for
This page is for v1, the first version of the Smoothieboard hardware.

Microcontroller:
The board uses the LPC1769 microcontroller, an ARM Cortex-M3 chip :
32-bit architecture
120Mhz frequency
512kB ROM ( program space )
64kB RAM ( execution memory )
Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.
The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features.Model Number: Item Type:–Motherboard
Included:
1 x Smoothieboard 5X V1.0
5 x Heat Sink
1set x Terminals
1 set x Jump Wire
1 set x Needles

Product Features

  • Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community
  • Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.
  • The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features.
  • Can control several machine types ( 3D printers, lasers, CNC mills/routers )
  • Uses as powerful hardware as possible at the time

Visit The Website For More Information…

2500mw CNC Laser Engraving Machine,Crafstmen 12V USB 40x30cm Desktop CNC DIY Picture Making Printer

PLS Get support from this website who is new with this machine ; http://lasergrbl.com/en/

Specifications:
Material: Acrylic + Aluminum
Main Color: Silver
Power Supply: AC 110-240V Output 12V 5A
Plug Type: USB interface
Laser Power: 2500mw
Laser Wavelength: 405nm (2500mw)
Supported OS: Win 7, XP, Win 8, Win 10.
Controller Board: EleksMana SE
Communication Port: Micro USB
Stepper Motor: 42H34S-1304A
Supported Software: Supporting GRBL (Candle, EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc.)
Supported Formats: jpg / bmp / svg / G-code
Image Size: No Limitation
Engrave Mode: Image Engraving, Text Carving, Scanning
Carving, Contour Carving, Pixel Carving. Laser Quick Replace: Support
Need to Be Built Up: YES
Continuous Work Time: ≤ 3 Hours
Working Voltage: DC 12V
Working Current: DC 5A
Engraving Accuracy: 0.5mm
Engraving Area: 300mm x 400mm / 11.81inch x 15.75inch
(Maximum) Engraved Object Height Limitation: No Limitation
Can Not Carve Objects: All metals, glass, stone, ceramics, jewelry, silver, reflective material, translucent & transparent material.
Can Carve Objects: All wood, bamboo, paper, plastics, leather, rubber, horn, sponge sheet, etc.
Can Cut Objects: Paper-thin, light wood, sponge paper, felt, fabric, sticker.
Package Weight: 4kg / 8.8lb

Product Features

  • Laser engraver machine material:aluminum material + acrylic ,Working area : 40*30 cm
  • Software : laser GRB, Power supply : 12V, 5A ,Pls download manual via this link : https://my.pcloud.com/publink/show?code=kZqvTT7ZjNI2yBuhMbfQ0WxT4b4Dxm3EpQdX
  • Standard 2500MW blue light, with cooling device
  • Package include : 1 x Laser Engraver, 1 x AC power adapter, 1 x protective glasse,1 x AU-EU Conversion plug ,1 x CD for software and assembly manual
  • This machine can be use for wood, plastic, paper, bamboo, horn, part of the cortex (purse), plastic phone shell, rubber stamp, photosensitive chapter, sponges, paper.

Visit The Website For More Information…