eSUN 3mm Blue PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Blue

eSUN 3D Printer Filament: PLA PRO 3mm

Size: 3mm nominal, 2.85mm +/-0.05mm actual

Extrusion Temperature Range: 210 to 225 Celsius

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.

PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210C – 225C
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Check Out Our Website For Details…

eSUN 3mm Cool White PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Cool White

eSUN 3D Printer Filament: PLA PRO

Size: 3mm nominal, 2.85 +/-0.05mm actual

Extrusion Temperature Range: 210 to 225 Celsius

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.

PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 3mm Filament Diameter (Dimensional Accuracy +/- 0.05mm), Actual Diameter 2.85mm +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210C – 225C
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Check Out Our Website For Details…

eSUN 1.75mm PVA filament, natural, 0.5kg/roll

eSUN 3D Printer Filament: PVA

Size: 1.75mm

PVA is a support material. Typically it is used with PLA filament. PVA is best printed around 195 Celsius.
When a PLA product is printed out, it can be thrown into water so that the PVA supporting material can be melted away. Cold water would take 4 hours to melt all PVA. Warmer water will melt PVA faster.

PVA is soft, soluble in water under normal temperature.

Product Features

  • Work as a supporting material for PLA and some other materials, but not for ABS.
  • Printing temp. is 190~220℃.
  • Original manufacturer.
  • 100% Guaranteed Customer Satisfaction, Premium product.
  • 1.75mm PVA filament with double layer sealed bags.

Check Out Our Website For Details…