Visit The Website For More Information…
Tag: etc.
Inkbird Pre-Wired 308S + 1.97” Replaceable NTC-5cm Probe Digital Dual Stage Temperature Controller 110V 1000W for Aquarium Heaters,Reptile,Hatching etc.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC308S Temperature Controller;
1x 1.97”Stainless Steel Probe
1x English Manual
About Probe:
This temperature probe can be submersed into aquarium direclty.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Product Features
- 110V 1000W
- Plug and play design, easy to use
- ℃ / ℉ Display can be chosen
- Easy to set your parameters
- Heating and Cooling differential function could be set separately
Detailed Information available on our Homepage…
SmartOmni 1.75mm Red ABS 3D Printer Filament – Dimensional Accuracy +/- 0.02mm – 1kg Spool (2.2 lbs) for 3D Printers RepRap, Makerbot, UP plus, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC etc.
Description:
Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results.
ABS Materials are extruded with great precision, meaning better looking prints, less calibration and fewer extruder failures.
The materials work flawlessly with most 3D extruder’ currently in the market.
Features:
Molding materials for 3D printer
Material: ABS
Color: Red
Filament diameter: 1.75 mm
Net weight: 1 kg/2.2lb
The best melting point temperature: 230 degrees Celsius
Print temperature range: 210?? – 250?? Celsius
Suitable for makerb/reprap/Mendel and other commonly used models
Package Size: 19.5 x 19.5 x 7cm
Package content(s):
1 X 3D Filament roll with spool
Product Features
- Color: Red
- Printing Material: ABS; most common 3D printing material
- Dimensional Accuracy: +/- 0.02mm; makes your designs much Smoother and well-made
- Printing Material Diamater: 1.75mm
- Heating Temperature: 210-250 Degree Celsius
Detailed Information available on our Homepage…