The printer nozzles are made of brass material, smooth inner surface without any burrs, prevent messy, and the tweezers are made of steel, which are long service time and durable.
The combined design can save your more time, which can bring convenient to your life and work, and give your friends, ideal gift for your friends, let them know you care about them.
Color: as the picture shown
Printer nozzles material: brass
Quantity: 42 pieces
10 x Cleaning needle
30 x M6 printer nozzle
2 x Tweezer
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Small items, please keep away from little kids.
- Package contain: you will receive 10 pieces cleaning needles, 2 pieces tweezers and 30 pieces M6 printer nozzles for 3D Printer, practical combinations for your daily or work using
- Reliable material: the printer nozzles are made of brass material, smooth inner surface without any burrs, and the tweezers are made of steel, which are long service time and durable
- Tweezers and cleaning needles: 10 pieces cleaning needles come in 0.35 mm, takes up small space but makes it easy to store and prevent messy, and 2 kinds of tweezers are provided for you, number 10 and number 17
- 30 Pieces of M6 nozzles: the size of nozzles including 16 pieces 0.4 mm nozzles and 14 pieces nozzles such as 0.1 mm, 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm nozzles, which can suit for most 3D printer
- Combined design: the combined design can save your more time, which can bring convenient to your life and work, and give your friends, ideal gift for your friends, let them know you care about them
Detailed Information available on our Homepage…
Attention: Small parts, keep away from children
Kee Pang All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 2 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers
Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C?Long-term temperature: 240°C/ short-term temperature: 280°C? 12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
Type : Extruder Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Compatibility:Compatible with all 1.75mm V6 3D printer
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFETube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.
- 100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement
- High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
- Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
- Easy to install: NTC connector with terminal, you can install directly
- Compatibility: Compatible with all 1.75mm V6 3D printer
Visit The Website For More Information…
The MDD v1.0 is the easiest direct drive conversion available for your Creality Ender-3 or CR-10 3D printer. Fully installed with the MK8 hot end and MK10 extruder, it’s lighter than a Titan Aero and takes just 20-30 minutes to install– with no firmware changes, no volume loss, and no cutting or splicing required.
While compatible with many hot end and extruders, the MDD was engineered to turn your stock components into a powerful direct drive system with no additional hardware needed, making it the simplest direct drive system for your Creality 3D printer.
No firmware changes are needed when using stock extruder and hot end, though we recommend starting with a new slicer profile with a retraction of 1.0mm and ooze control (coast, wipe, etc.) turned OFF.
- Increase print quality, simplify retractions and fix extrusion.
- Lightweight and rigid mount lets you to print fast.
- Print high temp and flexibles – up to 260ºC+ on the stock hot end.
- Simplify filament changes.
- No firmware flashing.
- No cutting / splicing wires.
- Works with stock extruder and hot end.
- Fits many printable mods.
- Simple 20 min. install (instructions provided).
- CNC machined 6063 aluminum.
- Injection molded fittings.
- Weighs ~478g installed (w/ hot end, extruder, motor, fan shroud, wiring, all fittings, hardware).
- Wire harness extension included.
- USA-made PTFE rated for 260ºC+.
Need help? Email [email protected].
- A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube.
- Installs in 20-30 minutes with NO firmware changes, no cutting or splicing wires.
- The PrinterMods MDD is lighter and less expensive than other direct drive systems, while offering the same or better performance.
- No X,Y, or Z axis build volume lost. Compatible with your stock CR-10 or Ender 3 hot end and extruder, as well as many others.
- Engineered and manufactured in the USA.
Click Here If You Need More Detailed Info…