1,Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture.
The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug.
The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved.
The new design can ensure that the size change of the total height of the products is less than 0.5-1.0mm, which is beneficial to mass production.
We adopt double top wire fixing to effectively reduce the risk of pipe loosening.
It is made by using the CNC machining center imported from Germany at once time,which can effectively reduce the cumulative tolerance of the product and make the product more stable.
With 0.5 square wire high-temperature version heating rod and PT100 high temperature version thermistor, the Maximum heating temperature can reach 350 degrees, and the Maximum temperature measurement of the terminable can also reach 350 degrees.
2 in 1 out extruderx1 Silicone Sockx1 24V 50W heaterx1 HT-NTC100K Thermistor x1 24V 3010 Fanx1 2*4 black PTFETubex2 M3*25mm Screw*4
- Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture
- The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug
- The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved
- The new design can ensure that the size change of the total height of the products is less than 0.5-1.0mm, which is beneficial to mass production
- Hotend is compatible with both HT-NTC100K and NTC100K thermistor
Visit The Website For More Information…
MYSWEETY mk8 extruder, come with assembled, support 1.75mm pla, abs, flexible tup, wood filaments and so on, widely used in prusa i3 3d printers, especially for Reprap, MakerBot, Anycubic, Hictop Mendel prusa i3 3d printers.
❥Make sure the maximum temperature is less than 280°C.
❥Thermistor sensor is risky demaged if it is fasten too tight.And please do not be panic if it is fallen out as arrived ,it is easy to reset.
❥Compatible with most prusa 3d printers with some slight modifications,if you would like to install on Anet A8,please cut the thumb bar of the extruder frame for carriage mounting.
Default extrusion nozzle: 0.4mm; 0.2/0.3/0.5mm optional
The material of Print: 1.75mm PLA/ABS/Wood/Flexible
Operating temperature Normal: 190-250 ℃
Throat: M6 X 30mm
The voltage of heating nozzle: 12V
Cartridge heater: 12V,40W, 1 meter lead
Thermistor: 100K NTC, 1 meter lead
Cooling fan: 12V 4010 fan
Stepper motor wire: 1 meter
The flow rate of Nozzle: about 24cc / h
Sports shaft speed: 40mm/s
Net weight: 450g
Stepper Motor: Nema 17 Stepper Motor, 4 Wires
Number of Phase: 2
Step Angle: 1.8 deg
Rate Voltage: 3.3V DC
Phase Resistance: 2.2ohms±10%（20℃）
Motor Torque:40Ncm/57.1 oz.in
Phase Inductance: 3.8mH±20%(1KHz)
1xMK8 Extruder(0.4mm nozzle)
1×0.2mm MK8 nozzle
1×0.3mm MK8 nozzle
1×0.5mm MK8 nozzle
1 x1 Meter stepper motor wire
- Assembled mk8 extruder come with 4 print nozzles; Diameter: 0.4mm defaulted; 0.2mm, 0.3mm, 0.5mm optional.
- It is compatible with most prusa i3 3d printers with some slight modifications when mounting it.
- Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing.
- Nema 17 high quality stepper motor with larger torque and less heat buildup.
- Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably.
Click Here If You Need More Detailed Info…
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
3 x 24V 50W Ceramic Cartridge Heater
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Visit The Website For More Information…