FilamentOne Plastic Spatula for 3D Printing Resin Removal Vinyl Film Wrap Cleaner Scraper Air Bubble Remover Sticker Installation Tool

FilamentOne Plastic Spatula was designed for 3D Printing Resin Removal without scratching the FEP film. It can be also used for Vinyl, Film, Wrap, installation, as a Cleaner, Scraper, Air Bubble Remover or Sticker Installation Tool.

Why buy from FilamentOne
– USA company manufacturing and distributing 3D printing supplies and tools
– Years of experience in the plastic industry and 3D printing technologies
– Known for premium quality 3D printing filaments, great customer service and as a valued member of the community

Product Features

  • Great for 3D Printing Resin removal without scratching the FEP
  • 5 Pack of FilamentOne Plastic Spatula
  • Air Bubble Remover Tool
  • Sticker Installation Tool
  • Vinyl or Wrap Installation Tool

Detailed Information available on our Homepage…

High Temperature Heat Resistant Tape 100mm X108ft AIYUNNI Kapton Tape Polyimide Film Adhesive Tape Heat Press Tape Sublimation Tape – for Heat Transfer Vinyl,Masking,3D Printing,Soldering

Main Features:

It can be used for end turn bundling and connection insulation in small motors. It is also used for cross-over insulation and out wraps on bobbin wound and form wound coils for large rotating machines to bundle conductors and reinforce insulation and it can also be used as wave solder masking of printed circuit boards. 

Features includes good adhesion, good tensile strength, low temperature application, short term, high temperature resistance, clean removal, good chemical and solvent resistance, UV resistant, easy unwind, good abrasion and moisture resistance, waterproof backing. 

Widely Used:

MULTI-PURPOSE APPLICATIONS – AIYUNNI adhesive tape is ideal Extensive for a variety of home and commercial projects,such as installing LED strips, 3D printer bed ,Computer, cell phones, Electronic Repair, Automotive,Solar industries, circuit boards and (PCB) components ,Fiber Optics Cable,Home electronics, large appliances, industrial machinery, transformer, motor, coil, capacitor,frequency conversion power,and More ( list not all inclusive).

Specifications: 

One-side self-adhesive design.

Substrate material: Polyimide polymers film and Dow Corning silicone.

Withstand voltage: >6000V

Heat resistance: The highest temperature up to 572 ℉ (about 300℃), Long-term temperature: 500 ℉( about 260℃), Short-term temperature: 572 ℉ ( about 300℃) 

Size: Length 108ft x Width 100mm x Thickness 0.05mm

100% brand new and high quality High Temperature Heat Resistant Kapton Tape Polyimide Film Adhesive Tape. 

Package includes: 

1* high temperature tapes

Product Features

  • ☆ AIYUNNI Adhesive Tape is a simple and practical Kapton tape,which is mainly made of durable polyimide and silicone materials, and features one-side self-adhesive design for easy to use,It is highly resistant to heat and chemicals, puncture and tear resistant at high temperatures and offers optimal performance in electrical and thermal insulation, and so it is widely used supply in electronic industry.
  • ☆ AIYUNNIAdhesive tape is ideal Extensive for a variety of home and commercial projects like 3D printing, Electronic Repair, soldering, high-temperature powder coating, etching,Automotive sensor and manifolds, Insulating circuit boards, Fiber Optics Cable, protecting sensitive printed circuit board (PCB) components ,Wave soldering during circuit board assembly,and transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry,and more!
  • ☆ AIYUNNI Adhesive Tape High temperature resistance and easily conformable,tape will leave you with clean precise lines and wraps that are easy to remove, with no gunky residue,excellent performance in many high temperature applications,and has high dielectric strength,The tape also is very puncture and tear resistant,It has an optimal resistance to weathering, moisture, acids, and chemicals.
  • ☆ AIYUNNI Adhesive Tape exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range,possess electricity insulation,high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, Etc Excellent performance.
  • ☆ AIYUNNI Adhesive tape Transparency allows for project visibility, such as observation of circuit boards during processing,Enjoy easy, perfectly placed applications every time, Whether you’re wrapping, coating, repairing, or insulating, aiyunni tape is the ultimate tool, its ability to maintain its unique combination of mechanical properties under the harshest of conditions.

Check Out Our Website For Details…

Automatic Leveling Module,3D Printer Part Automatic Leveling Module Film Pressure Probe Type Auto-leveling Sensor(Suitable for Makerbot nozzles)

Specifications:
Compatible nozzle(Optional): For Makerbot, for Ultimaker, for MK8, for E3D/ E3DV6 Weight:12g  Signal line: 1m/39.37inch
Related instructions:

Auto Leveling Parameters Description:
X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction
Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction
Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform
Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use)
Probe open angle: the angle of the servo for the leveling probe when the probe is
deployed/down (can ignore this when not in use)
Number of leveling points: The number of probe points that probe on the plane. The actual number of detected points is equal to the square of the set value. For example, if set to 4 points, 16 points are actually detected, and the maximum is 9, namely 81 points.
Probe trigger mode: Set the level state when the leveling probe is triggered.
Package Included:
1 x Auto-leveling module  1 x 1 meter signal line
Note: Do not use the leveling sensor when the nozzle temperature is higher than 45degrees!!!

Product Features

  • EASY TO BE USED:Easy to be used. Can be applied to different types of 3D printers. The default trigger distance is 0.1mm
  • HIGH PRECISION:High precision, leveling repeatability can be ± 0.05mm
  • THE AVERAGE SERVICE LIFE:The average service life of the module is more than 500,000 times
  • COMPATIBLE :Compatible with almost all the 3D printer motherboards in the current market
  • GOOD ANTI-INTERFERENCE ABILITY:Good anti-interference ability, will not be affected by the platform material, ambient light, ambient temperature and humidity, etc

Visit The Website For More Information…