Reuse, easy remove;
Separation type bending to take the model. It’s more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
If it doesn’t stick, please don’t worry, rotate the magnetic A side 90 degrees, match to the polarity.
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !
8.7″ A Plate+B Plate
- 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for prusa i3, MEGA, Anet A8, Creality Ender 3 and more Printer.
- 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface.
- Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
- Size: 220x220mm/ 8.7×8.7 inch
- After-sales Support: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.
Click Here For More Information
- Excellent heat sinks and the adhesive: Work well for Reprap MKS Mendel stepper Driver TMC2100 DRV8825 LV8729 and other motherboard.
- Excellent heat dissipation, comes with two extra heatsinks for gifts.
- Size: 9*9*12 mm/ 0.35″x0.35″x0.47″.
- Ｍaterial: Aluminum, very light and easy to install,
- Package included: 12 Pack Heatsinks + 2 extra heat sink. Need more help please contact us with Email. We will give you help within 24 hours.
Detailed Information available on our Homepage…
1.Size (LxHxW): 6 x 2.3 x 3.1 cm/ 2.5″ x 0.9″ x 1.2″
Voltage: 12V-50V (12-24VDC recommended)
2. Connect Power to power source, please note the anode and cathode.
3. Connect Hotbed to heated wire, please note the anode and cathode.
4. Connect digital control signal to Gnd, D8.
5. Connect the control signal of Ramps1.4 or MKS MOSFET to -Bed+
6. Choose one signal group to connect.
7. If you don’t know how to install, please contact us or find the related link in youtube, thanks
Please kindly note:
Pay attention to polarity
Only can choose 3 or 4 signal group
2 x 3d printer heated bed power module;
2 x connection cable for input signal
- Function and Use: control hot bed, print head heating, compact appearance, compact design, more powerful heat dissipation, to solve the problem of excessive heat bed power, current load problem;
- Extra large heat sink, the maximum current can be up to 30A or more, can use digital signal of 5-24v to control;
- This module under normal cooling, measured I (Max) = 30A can Stable long-term work during use, so we suggest the current should not exceed 30A.
- Connect the control signal of Ramps1.4 or MKS Mosfet to bed, can use hot bed output signal of Ramp1.4 and MKS series to control;
- After-sale Guarantee: Each one will be done functional test before shipment, so anyone receives a defective one please don’t feel hesitate to email us before leave negative review and feedback, we will give you support within 24 hours.
Visit The Website For More Information…